Mono TRS connectors have a single tip, ring, and sleeve. They’re typically used for headphones to send left and right channels to the left earcup. The SC17 is a 1.5m-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. The SC17 is also Hi-Speed certified, making it ideal for connecting the NT-USB Mini or RØDECaster Pro to devices with a USB-C input, such as computers and tablets. The SC11 is a TRS splitter cable for connecting two mono outputs to a single stereo input. It is particularly suitable for connecting two microphones to a camera, for example, dual Wireless GO receivers, or a Wireless GO and a VideoMic. SC15 – Lightning Accessory Cable (USB-C to Lightning) XLR cables are typically used for professional applications, such as live sound and recording in studios. They’re also used to connect microphones and other equipment that requires balanced connections. As with TSR cable, XLR cable houses three wires that carry ground (X), left or hot (L) signal, and right or cold (R) signal. XLR connectors may be male (characterized by three pins in the connector) or female (with three pinholes). The male connector transmits the audio signals, while the female connector receives them. Pros and Cons of XLR

Flexibility. It is easy to connect multiple short XLR cables to form a longer one. To daisy-chain XLR cables, you only need to plug the male connector into the female and continue this connection until you get the length that you need. Balanced audio cables are typically better for longer cable lengths as it provides better protection from outside interference, but unbalanced stereo connections can be a good choice for studios under 10 feet in length as they are cheaper and more accessible. What makes a good cable? Finally, a TRRS cable is just like the TRS but with the inclusion of a microphone channel. A common application for this type of cable is a headphone, where you can not only listen but also speak through the built-in microphone. TRRS is favored over the other two types for multi-media device use. Pros and Cons of TRS USB outputs are usually found on microphones intended for use with computers and mobile devices, like the RØDE NT-USB and NT-USB Mini, VideoMic Me range or Wireless GO II.Inside this cable are three wires designed to carry the left (or hot) signal, right (or cold) signal, and the ground. TRS cable is great for both mono and stereo signals, which means it is excellent for headphones and other equipment where a balanced connection is preferred. TRS cable is also a safe choice for plugging the equipment into two or more devices. TRRS Cable For live shows, XLR may not offer the same benefit as TRS because of its rather short length. However, XLR can provide more robust and balanced audio without catching too much noise. XLR also provides a more secure connection, whereas TRS connection loosens in time. The SC5 is a TRS to TRS cable that comes with the Wireless GO II (not sold separately) for connecting it to cameras and other devices with a TRS input. It features a memory wire cable rather than a coiled cable like the SC2, making it easyto route around a camera. TRS Is More Affordable and Ubiquitous: Although XLR is more robust, tougher, and less susceptible to shorts, TRS is a more widespread cable connector type because it’s so cheap. You’re likelier to avail of a TRS for balanced single channel, stereo, mono, and high-level speaker connections. This ubiquitous nature is the reason why it creates a higher risk of incorrect linkages though. XLR has a more limited application, which is balanced line-level audio. The main benefit of using an XLR balanced cable is its high sound quality compared to other types of plugs. With an XLR connection, the noise gets reduced, and sound quality is improved because each balanced signal travels through two wires instead of just one. TRS to TRS vs TRS to XLR Connections: Which Is Best for Your Needs?

Most microphones have either a 3.5mm, USB or XLR audio output (or a combination of these)for connectingthemto different devices. When performing on stage, it makes more sense to use TS cables as they are longer and easier to connect. Ideally, it should not be more than 20 feet long to avoid noise and any sound interference. An unbalanced audio cable comprises two main parts, a ground wire, and a signal. The former acts as the one who delivers audio frequencies, while the latter acts as a reference point and also serves as a shield from outside interferences. And while it does an excellent job of preventing slight hums from street lights and transformers, they also act as an antenna that, ironically, produces noise. Again, XLR and TRS follow the same balanced connection principle but with different “ends” or connectors. XLR uses pins while TRS uses a tip, ring, and sleeve system. On the other hand, TRS connections are easier to use than XLR because they don’t require any special tools to connect or disconnect them. Just plug them into your device!

Pros of TRS cables

A TRS cable is an audio cable used to attach audio devices to other devices such as sound cards or amplifiers. The name stands for “tip-ring-sleeve,” which refers to the distinct parts of the cable: the tip, the ring, and the innermost sleeve. Second, you should consider how much space you have available for your cable. If you need longer cables than a TRS connection provides, then an XLR connection may be more suitable for you. As you can see with the differentconnections listed above, it’s important to pay attention to what type of cable is required for your microphone and recording device. There’s nothing more frustrating than trying to plug in your mic and realising your cable is the wrong kind!