One of the big benefits of LED lights is that they are available in different colour temperatures, which means they can cast different shades of white light, so you can have full control over the ambience. These colour temperatures are measured in 'Kelvins' (K).

Another option for covering your strip light is to use a grommet. Start by threading the fabric through the grommet. Then, place the strip light inside the fabric and pull the fabric tight. Finally, use a hot glue gun to attach the fabric to the light strip. Method 8: Using a Wire Cover The lights are also completely cool since they’re LED, so if you have ever had issues with your hot incandescent bulbs causing a fire hazard, then this is a good alternative! 6. Give Safety a Boost:In describing the different shades and qualities of white, color temperature (CCT) and color rendering index (CRI) are two metrics that are important to keep in mind.

The aluminum channels may help dissipate the heat from the LED strips, but for the most part they are not necessary for thermal management and are primarily for mounting and diffusion purposes. Make sure that your power supply has enough power capacity to power the LED strips (detailed steps here). Every DC power supply will list its maximum rated current (in Amps) or power (in Watts). Determine the total power draw of the LED strip using the following formula:While there is some controversy over the safety of covering LED lights, most research indicates that it is safe to do so. In fact, it can give you more advantages for covering your led lights. You then need to add another 20% to avoid potential overload on the transformer. For example: a five metre length of strip lighting with 60 small LED chips equates to 25W, so it'll need a 30W LED transformer. How to make your LED strip lighting dimmable One of the main reasons companies recommend not covering LED lights is too much heat in a small space. LED lights are a popular choice for home and business owners because they are more energy-efficient than traditional light bulbs.

Colour temperature is used to describe how warm or cool a light appears and is measured in degrees-Kelvin. Lower temperatures, around 2700k are described as a “warm white” and will give off a yellowish-red LED light. Higher colour temperatures will be around 4000K, a “neutral white” and will look slightly more blueish. When finding the LED transformer you need, there are three main factors you have to take into consideration: As we have already mentioned, when you put these lights in enclosed spaces or covered areas, they don’t have anywhere for the heat to go. This can cause overheating, which could lead to mechanical problems or even a fire. 7. UV Light LED density is important in determining the distance between LEDs (pitch) and whether or not there will be visible hotspots and dark spots between the LED emitters. A higher density of 36 LEDs per foot (120 LEDs per meter) will typically provide the best, most evenly distributed lighting effect. LED emitters are the most expensive component of LED strip manufacturing, so be sure to account for LED density differences when comparing LED strip prices.LED strip lights are available in a range of sizes, with lengths ranging from 1m to 10m. Although, if you want to cut LED strip lights to size, feel free.