Of course, you don't need to use the highest resolution all of the time, and by changing to a lower capture res, you can make more efficient use of the onboard storage space. You can probably find a waterproof enclosure for the Pi, and the USB cable to the web camera will allow you to remotely mount the camera.

This can be useful, as you say, to avoid the “look” and animal perception of two flashes, but it will also prevent red-eye in the non-flash camera (assuming enough angular separation between the cameras and the target). Additionally, we recommend to use the Energizer Ultimate Lithium batteries (not rechargeable), or the Panasonic Eneloop and Eneloop PRO rechargeable NiMH batteries. The night time video duration can now be increased, but all of my night time videos are solid black.

That’s only because it has a shiny, metallic surface which mirrors the IR from the room (and not the heat of the SOC itself). In addition to many other features we have come to expect from Browning trail cameras, this 4K Browning has a motion detection range which you can optionally adjust from 55 - 80 ft and when combined with three adjustable (Low Glow) Infrared modes can provide you with the optimum night vision image control. I have also posted a sped-up video showing the whole process, including replacement of PIR baffle, and insertion of hole plugs. You can pay by iDeal, Wire transfer (bank transfer), Paypal, Credit card (MasterCard and Visa), Bancontact, Giropay, SOFORT, and EPS.

Recording video is another of the key capabilities of the Recon Force Edge, and it makes full use of its suitably powerful internal components and high resolution sensor to allow for clips to be captured at 1080p full HD at either 30 frames per second or 60 frames per second. We recommend Energizer Ultimate Lithiums as the best disposables, or Panasonic Eneloop Pro as the best rechargeables.I also ran a cycle where I used AAs rather than my 12v LiFeP04 just to make sure it wasn’t the LiFeP04 (although as I said initially I’ve run these with several other BTC-7Es without issues). Use a GoPro camera with a custom firmware load (from GoPro) that allows it to work as a motion activated trail camera. it might be that the long wires and ribbon cables for the camera lens and PIR might have too much resistance to send the necessary signal to the circuit board. Night videos are bright and of very good quality, which is improved over the black light Specs Ops due to the "conventional infrared light" illumination.