You can make it as simple or as complex as you like in normal user operation, from a simple setting (2 on/offs, every workday/weekend day the same, HW/CH with same time settings) to a complex, highly variable situation as I mentioned above. I do not have any of these, but the manual mentions EP2000, EP2002, EP3002 and EP6002 so I guess all of those are just as easy to replace with the EP2. It’s not very clear what this is showing, but the sequences are referred to as ID numbers running from 1 to 12. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

Be aware that the display is difficult to read from below, especially in poor or artificial light, avoid having to look up at the programmer.

One note however, the EP2 face plate has a tiny screw on the lower edge that is screwed in from the underside to really lock the faceplate in position. Some say that it's an ideal direct replacement and that it works seamlessly with their existing boiler. The new, simpler A-G energy rating scale is stricter and designed so that very few products are initially expected to achieve the top “A” rating. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Hello, I have a existing EP3002 and for some time now the boiler doesn't always shutdown when it's timed to.

Would have thought that after use they would go out until a button was pressed to turn them on when needed. The instructions look a bit daunting, but all you really need to do is to set the programmer for your preferred time sequence. Instructions good, but you also need to use the supplied installer instructions to get it working right for you.As others have said, it’s an easy replacement for an existing Potterton programmer with no wiring or plumbing to worry about, providing your existing backplate is undamaged, which it most likely will be. The Potterton EP2 is a heating system programmer designed and manufactured by Potterton, a well-known brand in the heating and boiler industry. Will have another go later tonight but have left the on and off times for all seven days of the week. Some mention that it is expensive and bulky, but it works as expected and is a great improvement over the original.

The extra flexibility doesn't make a lot of difference, because I copied Mondays settings to the rest of the week anyway. Managed to remove the old programmer from it's backplate / wall plate by rotating it upwards from underneath around its hinges at the top. Pott 7211473 Electronic Programmer EP2 Versatile electric fan heaterfor domestic and small commercial applications.I carefully cut the central support out and discarded it; this allowed me to push the wires back into the pattress and the programmer to fully locate on the backplate. We took off front cover of old one there was wiring underneath god we thought we would have to redo wiring but we didn’t the cover off new one just pushed in and straight away the boiler fired up. When slider is moved over to set all seven days appear on the top of the screen and I cannot just get to individual days of the week. These sequences are all laid out in the table in Section 11 of the Installer's Guide (above section 12 at the top of the middle column). The Potterton EP2 Programmer can be used for replacing existing older Potterton EP2000, EP2002, EP3002, EP6002 Models using the existing backplates with no rewiring necessary providing the existing backplate is not daMaged and in good condition.