A rotary cutter is a type of cutting tool for fabrics that can be used in lieu of scissors. It looks similar to a pizza cutter, comprised of a round blade held in place on a plastic (or sometimes metal) handle. This one is an ideal manual alternative to the dial design for those who have problems using their wrists due to arthritis or carpal tunnel syndrome. First, remove the blade from your rotary cutter. Be sure to do this carefully, not touching the edge of the blade. Although it may have become dull, it can still cut if you don’t handle the blade properly. UPDATE: WOW! After reading many of the comments by many of you below, it seems to be very successful! Others mention that sandpaper works better for them. Again, only use this tip if you are planning to discard the blade anyway and you want to experiment to make it last longer. Do not use this tip on blades that are already functioning well.

The Quilted Bear Rotary Blade Sharpener - Premium Rotary

Keep the blades clean at all times by wiping them off after every use. Keep the rotary cutter on a flat surface and hold the center of the blade firmly. With a paper towel, wipe the blade from the center to the blade’s edge to remove any residues. You can then hold the blade on your fingers and immerse it in some hot soapy water. Next, rinse it, then pat it dry. Go for a high-quality material like the diamond grit so that the sharpener serves you for long. Lower quality materials help you for just a while, and you’d keep purchasing new sharpeners every now and then, which is not worth it. iv. Mode of operation At this point, you can either pin the paper pattern to the paper or trace around the edges with a washable marker, then remove the paper pattern. The important thing is to ensure you know exactly where you’re going to be cutting. Another great thing about this rotary blade sharpener is that you don’t have to remove the blade from the rotary cutter. Leave it safely in the handle and simply roll the blade along the sharpener.

33 Comments

Sharpening saves you some cash that would otherwise be used in purchasing new blades. Also, there will be no wastage of material that would have been destroyed by the dull blades. First, be sure to have a proper cutting mat in place on your work surface. You should never lay your fabric directly on a tabletop without some kind of mat underneath. You may still need to replace your blades after a long time has passed – like after consistent use for several months or years – but overall, this will be more affordable than buying new blades every time they dull.

Rotary Blade Sharpeners | JOANN Rotary Blade Sharpeners | JOANN

This will grind your blade against the sharpening stones and create a sharp edge again on your dull blade.Be very careful when sharpening the blades. Do not get into other things while still sharpening the blades. Some rulers are coated with diamond carbide edges. So as you cut your fabric, the blade is sharpened, eliminating any dullness. How to Keep rotary Blades Sharp