If you want a Wi-Fi 6E system, then it’s worth going for the XE200 — but if you don’t necessarily need the latest and greatest Wi-Fi standard, we still recommend something else in the Deco series. The only special feature is the 6Ghz band, which is standard as "dedicated backhaul", which I have converted to "WiFi network and Backhaul". If you’re going for high end wifi mesh system, you should consider not only the speed of wifi, but the other benefits in a segmented topology, which btw often impacts speed more than wifi speed, by filtering out much of your DNS traffic before content is fetched, allowing less to fetch and more bandwidth to fetch it. Real-Time IoT Protection - Malicious Site Blocker - Intrusion Prevention - Home Network Scanner Robust Parental Controls Manage online time and block inappropriate content to keep families healthy online. If you don’t already know that, you’ve likely consumed too much nonsense elsewhere, I’d recommend starting with this post.

After 15 years of efforts to optimize WiFi at home, the TP-Link Deco EX75 6E system has finally succeeded. GHz + 4804 Mbps at 5 GHz + 4804 Mbps at 6 GHz (Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions. In fact, there’s no way you can know for sure that the router’s sole Multi-Gig port is indeed 10Gbps. And while the new Deco XE200 has “more,” its extras don’t necessarily all translate into real-world improvements.

Featuring one 10-Gigabit ethernet port and two 1-Gigabit ethernet ports on each unit; this mesh system will support any high-bandwidth traffic on your network. With the 10Gbps network connector, you ensure that you can also use the fastest internet connections at full speed.

This is the most powerful Deco System released, and potentially one of the strongest routers we have released across the board. WiFi 6E Tri-Band Mesh WiFi – Combines wireless speeds up to 4804 Mbps over 6 GHz and 5 GHz, and 1148 Mbps over 2. Experience the new WiFi 6E protocol operating on the 6GHz band eliminating interference from legacy devices. In my experience, this configuration worked out great when I placed the two XE200 units within 50 feet of each other with a line of sight. Even when the 6GHz band is set as the Dedicated Backhaul (default,) the other two bands are also available as backhaul when need be — the satellite still uses all the bands as its Signal Source.Was literally only able to get 10-20 mb up and down in front of the router with whatever device I threw at it. But because of the high-end features, the TP-Link Deco XE200 isn’t cheap — and it lives in a world in which TP-Link’s new Wi-Fi 7 routers have already been announced and will ship soon. Unless I missed something, this was defective or something and I have no inclination to go through this again. In a mesh system, only traditional Tri-band hardware — those with an additional 5GHz band — can have a dedicated backhaul band without ostracizing clients of the same band. In my experience, I just want a mesh router (or wireless router) that works, delivers on performance, stable, and can handle around 30 wireless devices lying around my home – all hungry for bandwidth and attention.