The result is better cutting quality on the underside of the workpiece, as the workpiece is supported from below up to the saw blade teeth and tearing is significantly reduced. The FURY5-S has a maximum 3250rpm no load speed, 1500 watt motor producing a max cutting depth of 65mm when cutting at 45° and 85mm when used at 90° providing smooth, precise cuts through all manner of materials. I found though that the blade had to be much higher otherwise the material got stuck at the rear of the blade guard which wasn't clearing it. don't get me wrong, I have some of it (circ saw, whacker and concrete saw) and its great when used within its capabilities.

Before clamping the lever down to lock it, I ensure I'm pushing 'back' so that it squares before locking. Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday). There is an adjustable angle push which slides within the guide rail to help feed and but wood at right angles or various other angles.I'll try contacting their support team and see what they say, I put off doing this because last time I contacted them unfortunately it wasn't a great experience, may have just gotten unlucky though. It consists of two (2) extruded aluminium parts which even when the handle is locked on the fence rail still result in the fence ending up with considerable and unacceptable deviation from true (i.

Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. Keep in mind that anyone can view public collections - they may also appear in recommendations and other places.Ideal for cutting steel sheets, rectangular profiles, cast iron pipes, scaffolding, skirting and canopies. The FURY5-S will easily cut steel, aluminium, wood, even wood with embedded nails and plastic, using just one blade. You might think the easy solution would be to make a new slider bar, but that is not such a straightforward option due to the form of the track. People had reported that the multi mat cutting blade doesn’t/ didn’t cut totally clean, well I’ve been cutting near 2” thick hardwood ply sheets, 4” hardwood planks, they are straight, true and clean, this may change as the blade dulls just like any blade.