Self-check: the Aico Ei3024 self-checks its sensor, battery, and internal circuitry every 48 seconds, and if there's any fault condition found, there will be a clear indication via a combination of yellow LED flashes and / or audible beeps. If the unit is in alarm when pressed, it silences the alarm for 10min (if alarming due to heat), 4 minutes (if alarming due to <150ppm CO).

Ei3024 Multi Sensor Fire Alarm • EI Electronics Ei3024 Multi Sensor Fire Alarm • EI Electronics

Its ability to respond quickly to both fast flaming and smouldering fires, simplifies alarm choice for the designated rooms/areas. The Aico Ei3014 is a heat alarm with a class A1 heat detection sensor which can be only be used as p.In the event of mains failure, the 10 Year+ built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation. Are there any cooking fumes or steam around this could be the reason behind the alarm fault – if so it may be incorrectly sited or the wrong sensor type for the area. The Aico Ei3018 is a CO alarm (Carbon Monoxide Alarm) containing a proven electrochemical CO sensor .

Ei3024 230v 3000 Series Optical and Heat Multi-Sensor Fire Alarm Aico Ei3024 230v 3000 Series Optical and Heat Multi-Sensor Fire

This is the Aico Ei450 RadioLINK / RadioLINK+ / SmartLINK alarm controller for controlling all the a. The Ei Electronics Ei3016 is an Optical Smoke Alarm with a proven optical sensor and automatic dust . With the Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage.

You will know when you need to change the battery, as you will hear a single regular beep (low battery warning) coming from the alarm, however it is recommended that you change the battery every year.