Logitech for Creators Blue Microphones Compass, Blue Yeti Mic Arm, Tubular Type, Articulated Mic Arm, Internal Springs, Desktop Clamp, Integrated Cable Management, Recording, Podcast - Black

Product Information

This will surely make your HyperX Quadcast stand out in terms of aesthetics. Also, the sleek and elegant design of the mic stand helps further that premium look and feel. Boom arms usually fit on your desk along with your other recording equipment. And since the mounting clamp won’t be as frequently moved as other parts, all you need is to find a flat, level surface to mount it once. Swap your 2-pound (0.90 kilo) Blue Yeti for a lighter mic and see how it goes. If weight was the problem, a lighter mic should fix it.

And yet despite its compact size, the Elgato LP doesn’t feel cheap. It’s metal build feels really solid and it’s still a fair weight at 1.69kg. We’re particularly fans of the cable race, which is concealed below two metal plates that are held in place by magnets. Classy! Note: When buying new springs for your arm, stronger is not always better. Find stronger springs but not too strong, or else you’ll have a hard time keeping the arm in the desired position. How To Fix Internal Springs Mics are pretty heavy and may require a different configuration to keep the arm at the best angle while recording. All you need to do is pull the arm out of the mount, and you’ll see a screw at the base of the tube that connects to the hole in the clamp. Use a crosshead screwdriver to loosen or tighten it, depending on the weight of your microphone.Tired of squeaky, flimsy scissor booms? We are too! Compass features a broadcast studio-grade design with enclosed aluminium construction, internal springs and hidden-channel cable management. All friction hinges are hand-tightening – no need for any tools – and a full 360-degree rotation means you’re covered for any application. The spring tension is very strong, maybe even too strong. I am using mine with an Audio Technica ATR2020-USB microphone. I use this setup for Zoom calls and voice overs. This is the older version, and it's a substantial microphone in terms of weight.

The TONOR boom arms come as a good solution when you are on a budget and are not willing to spend extra on the higher-end competitors. But, considering that you have already bought a quality mic, maybe it would be better if you also bought a better and sturdier stand for it. First, there are no exposed springs or knobs. This means that you aren't going to catch your clothing, fingers or other cables in the arm. But if you’re using other boom arms with different external wire management, the straps could fail to hold onto the wires due to damage. Unfortunately, there aren’t many ways to get away with this. If you’re the kind of person that cares about how your battlestation looks, the Compass is a perfect way to add some class and professionalism. Audio quality

The quality of this tube-style boom arm is superb as the fit and finish looks sharp. One side of the boom arm has the Blue logo on two of the three pivot points, so you might want to position the stand on your desk to where these are facing the camera of your guest. The other side has friction-hinges that are meant to be hand-tightened once the boom arm is articulated how you like it. Fit the system that you’re going to use to hold the boom arm – we’d suggest that if you’re not sure, opting for the clamp in first instance. On the bright side, mounting clamps in boom arms aren’t twisted or turned as many times as other parts of the mic. So, once you find the ideal location for your arm, you no longer have to move it unnecessarily. While this detail may mean very little to some people, I also love its look. The finish on it is very sophisticated looking and is sure to make your setup pop. It's designed for the Yeti and works with many other brands broadcasting microphones. Like I said before, I've used it with my Shure. Overall, it's a great accessory and worth every penny. Keep mic angle adjustments smooth and quiet, with hand-tightened friction hinges there’s no need for any tools; Compass stays in place throughout your audio recordings and live broadcasting

For as long as we can remember, the RODE PSA1 has been the benchmark, middle-of-the-road boom mic arm stand that all others are measured against. Cheap microphone boom arms tend to have weaker springs than their high end rival. The rest of the mechanics tend to be on the cheap side too. Another common error with adjustable boom arms is the tension adjustment – on many cheaper booms, the knobs tend to be made of a cheap plastic and can very easily be overtightened. All of which makes the stand virtually useless. Lastly, do not put too much strength into bending the hot metal. It will only do more harm than good. 5. Worn Out Cable Ties For those less experienced with using microphones, one challenge you'll face right off the bat is this terrible sounding noise known as plosives. Plosive noise is a booming sound that ruins parts of your recording, created by the tight airflow on syllables beginning with letters like "P," "T," or "B." Fortunately, relatively affordable accessories called "Pop Filters" help combat this. While on the smaller size, this mic boom arm is a solid addition to most studios, and comes with a few unique features not seen on other models.If you’re after a luxury and heavy-duty boom arm that looks and feels different than the rest, take a look at Yellowtec’s m!ka. In addition, you could add a hard material between the metal clamp screw and the soft desk material, such as a piece of flat wood. 4. The Mounting Clamp Bends Sideways If your clamp bends sideways, it could be one of the few issues highlighted below. How To Fix an Uneven Surface Most boom arms we use today are spring-loaded, which means they rely on spring action for smooth movement. Unfortunately, both internal and external springs often malfunction after years of use, depending on your mic’s build quality.