Enter this new value by sending g-codes: M92 Exxx.x (you MUST replace xxx.x with your calculated new_e_steps) M500 (saves the value to non-volatile memory) In practice, the difference between Marlin and MKS firmware is much more noticeable in some models. Especially when many rounded surfaces are to be created, Marlin has a clear advantage. The firmware calculates the movements better and so the nozzle does not get bogged down. Often, however, this is the only major difference between the Marlin and the MKS Firmware. Objects with many straight lines are created equally well.

The drive mechanism of this 3D printer is Bowden, there are Nema stepper motors inside the 3D printer that will allow the nozzle system to move up and down during printing layers of a part or functional prototype.

Sources

However, it does look like an efficient design selection for the smooth feeding of filament. At least, the results specify the same. It is brought to its glass transition temperature in the extrusion chamber, after which the 3D printer filament is allowed to flow on the print bed using the nozzle system. The first model we printed was one of the default 3D printer models that came on the SD card, an FLSUN-branded elephant. This took a little over an hour to print, and came out looking great. The printer handled the intricate FLSUN indents perfectly, as well as the elephant’s eye, and without any stringing.

Temperature calibration is usually done with a towet like structure which has changing properties from segment to segment to test multiple options in one go. There are many ways to create these towers, here are some of them:Enables easy wifi printing, time lapses, remote management, sending G-code and features a really poweful plugin system. Change default print settings to ensure better first layer adhesion. Otherwise your first layer may hang like a loose string. From March 28th to May 9th, the pre-sale of SR printer has officially ended, thanks to the support of 3D printing users to FLSUN and SR printer. Another advantage of Klipper is that you don't have to recompile and flash the printer firmware every time you change something in

Featuring fast print speeds and due to its bigger size at 255 × 365 mm, perfect if you're wanting faster, larger prints without sacrificing quality. It also offers remote printing via Wi-Fi which means there'll be no need to tie anything down when setting up your machine next time around.The standard test of any good 3D printer, we printed a 3DBenchy with zero supports. The result was an almost perfect Benchy — barely any imperfections even in the overhangs to create the inside part. Very impressive from the FLSUN QQ-S 3D printer. There are a couple of options on thingiverse, but the best so far can be found at: https://www.thingiverse.com/thing:4677442 (opens new window)

The SR already comes with silent stepper drivers (TMC2209), so you can just skip this section. # BOM (What you'll need) The SR is also very quiet for a 3D printer of this caliber. At under 50dB, no louder than someone talking over a TV show, it won’t disturb even if you’re printing late at night in an apartment.Has auto leveling and since it has no moving print bed, only needs to be leveled once. This is a major plus for beginners without as much technical skills. the configuration file like you do in Marlin. You can even edit the configuration file on the web interface and hit a button to reset the printer and instantly load the new configuration. This makes the tuning process much more efficient. Move the carriage to the top position, where you can barely access the screws and tighten the rail clamping screws. Im doing further tests for geometry and finish but so far 60hz is going to ok to start with. In the coming weeks i will do additional tests and post a graph of the results based on Frequency change v Quality and Accuracy. We also tried printing a small vase with some interesting geometric shapes, also shown below. The FLSUN QQ-S again passed every test, creating a beautiful vase model with crisp features and no errors.