Creality Ender-5 Plus PEI Magnetic Flexible Heated Bed, 3D Printer PEI Printing Plate 377X370X2mm

Product Information

Ultra Large Printing Format: 350X350X400mm | Meet more of your printing requirements, enable more ideas to be printed out, achieve better print results, and a larger print model at a time. Once you’re done, run a BED_MESH_CALIBRATE and look at your numbers. You will find you’re within hundredths of a millimeter. Do all this with a cold bed, by the way. Honestly, it doesn’t seem to matter. Resume printing Function: Creality Ender-5 Plus 3D Printer resume printing while power-off, the motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages.

An additional lead-screw on the Z-axis is another big improvement, stabilizing the drive and reducing the likelihood of build errors. The Ender 5 and Ender 5 Pro have only a single lead-screw that is made for a much less stable build platform. All-metal hot end: Allows higher temperatures, eliminates PTFE tube degradation, expands filament options. So if you don’t want to go through the effort of upgrading the entire motherboard, you can simply install these dampers on the Ender 5’s stepper motors along with the heatsink and still reduce the Ender 5’s volume by a good amount. Build surface locating pins - When using a magnetic build surface, our locating pins (screws) aid you to placing the removable build surface, every time.So I am leaving this review to explain what are the symptoms, why it happens, and how to mitigate or solve it. What we’re going to do is start heating the bed and do a BED_MESH_CALIBRATE whilst it’s heating so there’s no wasted time. The printer comes with an SD card with a Windows version of the Cura slicer and an Ender 5 Cura profile (.json). Recent versions of the program offer a pre-set profile for this printer. PEI is also a good option if you prefer the easy removal offered by a flexible plate and want to do away with clips with a magnetic plate. A bigger build volume, a new bed-leveling probe, improved components: The Creality Ender-5 Plus strives to better the Ender-5 3D printer。

These beds are made from cast aluminum tooling plate with the top and bottom surfaces left untouched (mill finish). This means occasionally there can be some small marks on the surface from material handling, nothing significant but still visually noticeable. This is just normal condition for the material. We do everything we can to deliver a visually appealing product to our customers but we can't prevent what happened before we buy our raw material.

Creality Ender 5: Is it worth it?

A heated bed is one of the key components of a 3D printer, as almost all materials require one to print successfully or achieve the best results. One of the issues with a heated bed is that the cables are frequently not supported, which causes the connections to break over time. Unfortunately, this is an issue present in the Ender 5 Plus. Launching the Ender 5 Plus, Creality made a leap in terms of size. The Ender 5 Plus stands a lot bigger, at 632 x 555 x 619 mm (X-Y-Z). This delivers a build volume of 350x350x400 mm, along with several detailed changes that are worthy of note.