Paterson Film Processing Kit :

Product Information

Storage bottles. Your chemicals can be saved and reused, these bottles are designed specifically for this purpose with a collapsible design. While there’s a lot to like about the Cinestill / JOBO kit, it does have its flaws.Here’s what we dislike about this particular film developing home kit: Now close the changing bag and put your hands in the sleeves. It’s important to pull the sleeves up to the elbow to avoid any light leak.

Good amount of chemicals to start. This film developing kit has enough chemicals to develop 40 total rolls of film, which is a great amount to experiment, learn, and get the hang of things before committing to buying a larger quantity of chemicals. Take one of the ends of the fill and load the film into the spiral reel. If you’re using a plastic one the process should be easier. Temperature control device allows for more precision. It can be intimidating to start developing film at home, so the temperature control can remove a lot of uncertainty you may have.If you don’t know how to develop 35mm film (or any type of film for that matter) read this section carefully.

Developing tank. Paterson Tanks are frequently recommended. Pay attention to the size/how many rolls of film you can develop at once. If you’re using a multiple-reel tank for only one film, make sure that you still place the other spirals inside. Even if they’re empty, they will keep the one with your film firmly in place. If you don’t have enough room or time to develop film at home, you might find some local shops that can still develop films for you (depending on where you live). It’s best to pour the developer slowly to prevent spillage. When we’ve poured all of our developer in, lift the tank and tap it down firmly onto a hard surface a couple of times. This is to ensure bubbles don’t form and potentially ruin development. Repeat this periodically, while agitating to the recommended routine. While some photographers prefer not to do this, I’ve had good results from adding around 30 seconds to one minute of development time to ensure that the negatives aren’t underdeveloped, as negative film is generally more tolerant of overexposure than under. If you have a completely dark room that’s great. If not, you can use a changing bag. This is a lightproof bag with sleeves.Measuring tools. It’s important to use precise measurements when developing film. Beaker-style measuring tools usually work the best. You should never measure chemicals with a tool that you also use for food. Archival quality prints available - chosen after you've seen the scans to ensure that you're only paying for the prints you want Benefits: This is because it’s the easiest one to do at home. All you need is a place with running water. At home, this usually means the kitchen or the bathroom. A sink, bath, or anywhere with access to a water supply. This is where the developing will ideally take place. There are a few safety precautions you need to take before starting this development process. Ensure that you wear rubber gloves at all times, and that you’re carrying out the developing in a well-ventilated area. If you feel faint, dizzy or otherwise unwell, make sure to take a break or leave the room. The liquids used in these photographs are for demonstrative purposes, but you should always make sure to use rubber gloves when handling potentially hazardous chemicals. Working solutions of developer and fixer for one roll of 35mm film.

The developing tank and spirals can be accommodated the 2 rolls of 135/35mm films at a time or 1 roll of 120 film, made of unbreakable plastic, the spiral reels compatible with Paterson and other tanks on the market. Powder developers can be mixed only in part. So, if you don’t have many tanks to process, this will avoid unnecessary waste. These also have a longer lifespan. The next steps must take place blind inside the closed changing bag so the film is continuously in complete darkness. At no point until the film is wound on to the reel and then placed into the tank and the tank firmly closed can you open the changing bag. Once the film is loaded, place it in the developing tank. If you’re doing one film in a single-reel tank there’s no problem. Fixer –This chemical is used to stabilize the film after developing. This a crucial step in the picture developing process.Many analog photographers are looking for ways to save money to account for the massive increase in the cost to shoot film. While the biggest savings come from scanning your own negatives, you can also save some more if you’re willing to develop film at home. Photo Flo: If you’re going to use Photo Flo, which is optional, you should get it ready as well before you start. Cinestill also carries additional accessories you may need for developing – things like film changing bags, storage containers, etc. Thermometer. One of the most important aspects of film developing is the temperature of your chemicals. A basic thermometer is included to monitor this.

Since the use of this product is to avoid watermarks, the right proportion depends on the quality of the water. You can start by following the recommended amount from the manufacturer to get a sense of it and then experiment. Most films have an ‘expiration date’ of two years. However in general they long outlast this prediction. After soaking, pour the water out of the tank. If the water is a weird color or looks murky, don’t worry, this is entirely normal. With the thermometer, test the temperature of your developer to ensure that it’s at 20°C/68°F. If it’s colder, you’ll need to warm the solution. The best way to do this is to fill your sink with warm water, place the beaker within it and wait for the solution to warm. If it’s too warm, you’ll need to cool the solution down. As a recommendation, for every 1°C/1.8°F the solution differs from the norm, increase or decrease your developing time by 10%. For example, if developing at 19°C/66.2°F, add 10% to the overall developing time. Another popular option for beginners looking to develop film at home is the Cinestill / JOBO Duo Film Developing Kit. Similar to the Ilford / Paterson kit, the Duo is a combination of products from two prominent brands.

Our 35mm film development process uses high-end equipment which produces brilliant colours and stunning details, ensuring excellent image quality every time. A daylight tank allows users to put the exposed film in bright light conditions. The agitation process has been automated, which ensures a steady developing process. The chemicals are heated and monitored in the interface with a steady temperature without the need for sturdy cables. This popular, home film developing kit features products from two of the most prominent brands in the industry.