Joined in 2023 
82 
63 About this deal
Since the Libre Computer ROC Renegade works fantastically as a NAS, you'll probably want to use it with a hard drive. The Raspberry Pi X830 solves the problem of how to store your HDD. Instead of a separate external hard drive hooked up to your ROC-RK3328-CC's USB port, the X830 HDD SATA storage enclosure means you can add a SATA hard drive to your Libre Computer Renegade for server use. Just add OpenMediaVault, Ubuntu, or Debian. There's a power switch included, and a heatsink for keeping your CPU temps regulated. With easy access to the HDMI output, USB ports, and Ethernet port, the X830 could transform your Libre Computer ROC-RK3328-CC into a NAS HTPC combo. To test the utility I took my nearly full Pi 400 image and prepared it to boot on the “Le Potato”. I booted the Pi 400 and ran the script: Raspbian on Pi 400 running portability tool Raspberry Pi 4 has been released and it’s going to solve all the performance woes you had with Raspberry Pi 3. The Raspberry Pi 4 is not just an incremental upgrade but brings a whole new powerful processor, more RAM, and a multitude of ports. Have you tried doing it yet? The most important thing for some of them like N64 and PS2 is going to be having proper working 3D drivers/acceleration. What should be the content of /etc/alsa/asound.conf? I’ll type it in the current system and see how it goes.
The second point involves closed source components of the Raspberry Pi related to hardware. If you are using any hardware that makes use of these closed-source Raspberry Pi hardware features that isn’t supported. This is essentially true with every competing board to the Raspberry Pi due to the closed-source nature of these components on the Pi. I have a full review for the Libre Computers “Le Potato” here and a SSD booting guide for the “Le Potato” here For the next image would it be ok for me to request a few additional kernel modules and overlays, or would that be scheduled for later on in the debugging process? read -n 1 -p "Modifications complete. Press any key to shutdown. Once the green LED stops blinking and turns off for 10 seconds, remove power and move the MicroSD card to the Libre Computer Board." a. Make sure the storage medium is not damaged. MicroSD cards can break if the board is installed or removed from cases without removing the card first. Hair-line fractures will cause short-circuit so do not try to use them if you notice any fractures or damage! Short-circuit can cause the card to get really hot and burn your skin.
Frequently Asked Questions
Comment out all configuration options and add the following at the bottom of the file. This is a public Google DNS server. Everything is very solid and looks good. The edges of the board are very clean and everything feels sturdy. I would rate the build quality as excellent. The pictures don’t do it justice as the boards traces actually catch the light as you rotate the board which is a very cool visual effect. Images Available Unfortunately, OS compatibility is decent, but nowhere near as robust as what SBCs such as the Raspberry Pi offer. Still, there's a solid list, notably Ubuntu, Armbian, and a pair of Libre Computer Android OSes in Android 7.1 and Station OS. Libre Computer Renegade Review: Final Thoughts In addition, as the MIPI cameras, DPI displays, and DSI panels are pieces of Raspberry Pi-specific hardware, these would not be supported on the Libre Computers with the same image.
At no point after attaching power should the Red LED blink or turn off. If this happens, it means that your power supply is inadequate. Please make sure that you are using a 5V power supply capable of supplying at least 1.5A (1500mA). Not having enough power could cause spontaneous reboots or software errors.
Copy-on-write and zstd compressed filesystem (reduces write-amplification and improves MicroSD card life) OpenMediaVault or OMV, is a Linux-based OS designed for network attached storage (NAS) use. Onboard, you'll find a bevy of features for creating a DIY NAS box. For instance, Watchdog, Syslog, S.M.A.R.T., and SNMP for monitoring, RAID 0, 1, 5, 6, 10, and JBOD, plus protocols like FTP, NFS, CIFS through Samba. There is actually a Libre Computers subreddit. There’s not a lot of activity other than me posting my articles but I’m actually seeing a little bit more there now and a couple of questions popping up. I’ve encountered the official Libre Computers reddit account here before and some of the other people in there seem to work there or be involved somehow. That’s another place you could consider where you are also pretty likely to get the attention of Libre Computers themselves (at least while they’re still this small). Software designed around specific Raspberry Pi® hardware such as MIPI cameras, DPI displays, DSI panels are not supported.
Make sure you use proper tools to flash correctly. Incorrect images or incomplete flash will not boot. We recommend running a verify pass to make sure the data is correctly written. Also make sure that the image file matches your board model. On Windows, make sure to show file extensions so you can tell if the file has been decompressed. Flashing a compressed image will not boot.Excellent, we are definitely getting our USB 3.0 speeds and hitting about 3x higher numbers than the “Le Potato” can due to that model only having USB 2.0. Make sure you see my SSD boot guide for instructions on how to set up a SSD with the Renegade for high I/O performance! Pros / Cons Pros Because of its compatibility with Raspberry Pi 3 accessories including GPIO and cases, it's a solid buy. I suggest using your Libre Computer ROC Renegade as a NAS or an Android-based HTPC running Station OS. Considering this, you should snag the Element 14 or X830 if you're making a server. For most other purposes, almost any Raspberry Pi 3 case should suffice, although cases like the Flirc and LoveRPi Media Center PC case avoid some of the slight design differences between the Pi 3 and Libre Computer Renegade such as its one fewer USB port. I'm overly pleased with my LoveRPi active cooling case for a Libre Computer ROC-RK33328-CC Renegade Android desktop/home theatre PC combo running Station OS. Yet, the Raspberry Pi features support for a bevy of add ons such as a Power over Ethernet (PoE) hat, Picade X HAT, and a slew of sensors, touchscreens, and more. With its 40-pin GPIO header, the Libre Computer Board Renegade maintains compatibility with a number of devices for SPI, UART, and GPIO goodies. But, once again, the Raspberry Pi 3 comes out on top. I definitely concur with this. The 1080P will be comfortable to use. Not perfect but you won’t be miserable or angry with me because it should be pretty comfortable in 1080P unless something else is wrong like you have a rogue service wasting a bunch of resources on the Potato or some other explanation. These caveats likely won’t apply to many (maybe even most) people reading this article (and if they apply to you then you will know it). Instructions
Get a good power supply capable of 1.5A or higher. Our CC boards typical use around 1.0A, each USB device use somewhere between 0.1A to 1A. The cable and connector quality and seating is as important as the power supply. If your board spontaneously reboots without any error message, it’s a power problem. Finally we can complete the operation by running the same command we ran before but specifying the correct board type after oneshot.sh. For example for the “Le Potato” the identifier we should use is aml-s905x-cc. That would make the final correct command look like this: sudo lrp/oneshot.sh aml-s905x-cc With the on-board USB 3.0 port you can achieve very high I/O performance scores rivaling anything a Pi 4 can do. The quad-core CPU is no slouch either and the 2GB of RAM included doesn’t leave you starving for resources. It’s very comparable to a entry-level 2GB Pi 4 but you can buy 2-3 of these boards for the prices that the Pi is going for right now. Benchmarking showed excellent performance gains using a SSD with this board (and pretty impressive SD card performance as well).Despite the prevalence, and popularity, of Linux OSes on single-board computers, there are non-Linux distros available as well. Notably, you can run Android on boards like the Raspberry Pi. Likewise, the ROC-RK3328-CC runs Android. It's a tablet-optimized version of Android, not an Android TV iteration, so navigation using a monitor or projector might feel slightly cumbersome. Nevertheless, with a keyboard and mouse, you can make your own Android desktop using a Libre Computer Renegade. Try Android on the ROC Renegade for an HTPC and gaming set up, or for Android app development. Android releases may be found for many other devices including the Raspberry Pi. Great question! So believe it or not the “Le Potato” supports 4K video. It has a penta-core GPU. Here’s the specs: c. Flashing is not copying the file! Flashing writes the raw data to the disk while copying writes the data on top of a filesystem. Copying files will result in the board not booting at all. Spinning up a Libre Computer Renegade project is fairly simple. You'll just need a few items to get started. First, the Libre Computer ROC-RK3328 board itself. You'll also need a 5V 2.5A micro USB power supply. For installation media, a microSD card and an operating system are required as well. A case is optional but recommended.
Great Deal 
New Comment