A minimum of 3 months should be left after the installation of a new driveway or patio before sealing to ensure that any efflorescence or staining has had time to dissipate With a two-layer system, Easyseal systems are ideal for smaller roofing applications, including porches, garages, extensions and dormer windows. They are also usable on larger-scale applications due to the easy no-fire installations as per IKO's 'Step by Step' fixing instructions. Surfaces must be clean with no visible stains, dirt, debris, algae, moss, mould, fungal growths, waxes or coatings – as well as being free of previously applied finishes otherwise there is a risk they will be permanently sealed in after application. Surfaces should be clean, dry and free from mould, debris, algae and efflorescence before applying to the sandstone

Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair.For those who need to install roofing membranes, but want to avoid the hassle and experience requirements that ‘torch-on’ methods such as hot bitumen or use of naked flames usually bring with them, the BBA approved IKOR Easyseal self-adhesive roofing system is absolutely for you. An extremely versatile product guaranteeing an excellent performance on any flat roof it is applied to, this excellent product is made up of a polyester reinforced aluminium core and a bitumen coating. Before using this product, it is recommended to use A/C EasyDry if moisture is present in the system. The self-adhesive properties eliminate the need for gas torches and hot works, hot bitumen, and any other messy sealants that CAN make installations irritable and time-consuming. Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings.

EASYSeal BCS is ideally applied to a dry surface but can be used on lightly damp – not wet or soaked surfaces, must be free from standing or ponded water

IKO EasySeal roofing membranes should be installed generally in accordance with BS 8217: 2005, ‘Code of Practice for Reinforced bitumen membranes for roofing’ and IKO fixing instructions. EasySeal roofing is applied as a two-layer system, bonded by the removal of the release film on the reverse of the product, in accordance with the detailed 'Step by Step' fixing instructions available from IKO. This Coldseal Self-Adhesive Top Sheet Roofing Felt from IKO is a part of their Easyseal system that doesn't need any flames during installation. As a result, you have an increase in safety and a reduction in difficulty for application.