Note that the first question mark style hook template was created by drawing around my neighbour's existing one. I simply drew around it directly onto cardboard and sawed it with a steak knife(!) Just use what you have! The multi tool needs a steady hand to get started, then kind of chisel out to cut a perfect line, then hand saw the remaining excess. Sanding The Edges

You'll need a wood that is strong under pressure, so avoid a softwood. For mine, I used an 18mm hardwood ply offcut from my DIY dog house project 2 years ago. How to Make Boat Fender Clips For a more professional finish, then I would recommend a band saw or scroll saw as I know it's easier to cut small projects. However, for the power usage and storage needed, I think this would be more suited for businesses making fender boat hooks to sell. But, understandably, not many boaters will have this at hand! Jigsaw While cutting with any tool, I wouldn't do this without go od clamps and some form or surface. I tend to use my sawhorses, but a fold-away workmate would be useful. I'd even be tempted to be resourceful and screw a section that later needs to be cut away, to a tree stump to secure while working. Cutting Easy Boat Fender Hangers Material: The pontoon clips for bumper constructed from eximious ABS material are durable and will not scratch your boat rails. The surface of boat fender hangers are smooth and don't worry about scratching your sofa on your pontoon boat. For lines up to 3/8": The diameter of the pontoon buoy clips' eye is 0.45", which is suitable for lines up to 3/8". Make sure a tight knot at the end of the rope after the rope goes through the hole, which can avoid the rope from slipping.And with me always being inundated with wooden offcuts in my workshop, it made sense to create some while reducing the use of plastic, too. Also, it's fun to be resourceful and learn new woodworking skills. Do you have any other boat fender storage ideas? Let me know in the comments below! More Boat Projects You Might Like Get the most out of your boat fenders with our expert range of fender accessories. From valves, to covers, to hooks and even cleaners, we have every accessory you could possibly need. Fender Baskets: Channel Islands; Inflatable dinghy price on request Channel Islands; Flares not available to ship at this time However, we are future-proofing it for when the time comes to live on it as much as possible. That's the plan, anyway. What Are Boat Fenders For?

Alternatively, you could use a Vitrex profile gauge (below), or similar, which you can push against a protrusion and draw the shape onto cardboard and continue. (I didn't use mine as I'd left it at home!) Make Room For Expansion For further information on our fender accessories for sale, why not give us a call on 01634 295 233. Before even painting and making them stainless fender holders, I drilled a hole using a 16mm flat wood drill bit. You could also use an auger drill bit for this. Before tying a boat fender rope knot, you'll need to treat it as we used wood. For cheapness, I wondered whether I could use hammerite for wood because I had it in my workshop and would match our narrowboat chimney. In best boat fender clips, prior understanding of the product is always important. Other performance-related factors may be included in these findings. For this reason, we recommend that you evaluate the product's price to its value before making a decision.Applicable: Suitable for lines below 3/8 inches in size, and the height of the fender can be easily adjusted. A knot at the end of the rope after passing through the hole can prevent the fender line from slipping accidentally. If you need boat rail clamp rod holders, personally, I'd try designing something like an S hook by drilling in wood with a holesaw slighly bigger than the diameter. How to Make Your Own Template Without a Printer