You're now up and running with the ambiMIK-1 streaming into OBS. Next stage is to configure the Dirac Live VST plugin so we're converting the ambisonic signal from the 4 mic capsules to a binaural signal one can enjoy with a headphone. 3. Configure the ambiMIK-1 VST plugin [Top]

I/O capabilities get an upgrade too, with the addition of USB audio streaming up to 192 kHz and a TOSLINK digital input. The miniDSP 2x4 HD will find application in full-sized hifi and home theater systems, on desktops, in cars, in recording studios — anywhere a compact, simple, yet surprisingly powerful DSP audio processor is needed. Did you definitely have the correct calibration file for the orientation of the microphone in each case? Getting this wrong for one of the microphones could cause this sort of difference I think. A dialog box will prompt you to name the source. We'll call it ambiMIK-1 for the purpose of this demo. REW: miniDSP worked along with John Mulcahy to develop even greater compatibility for the UMIK-1 inside REW! With the latest beta release of REW (v5.01 and up), the UMIK-1 is automatically recognized by the software and prompted for use when REW is started with the microphone plugged in.

Please note that OBS is third-party software. miniDSP is not able to directly provide support for this software. For questions or issues specifically related to OBS, please refer to the OBS Forum and its online tutorials. The main measurement plot shows a frequency measurement graph in red. At the left is a small "thumbnail" version of the measurement - each time you make a new measurement, a new thumbnail will appear here. At the top of the screen are buttons that access various tools and immediately above the measurement is a row of tabs that show different "views" of the measurement. Make sure to configure the plugin to binaural audio output. See the ambiMIK-1 manual for other settings you might want to modify. You can easily confirm that the VST plugin works as it should as only 2 channels will now become active under the Audio Mixer.

The scale at the right of the graph is the phase values. Since we are not looking at phase in this app note, this can be ignored.) The UMIK-1 is an omni-directional USB measurement microphone providing Plug & Play acoustic measurement. Based on another thread it might also be that your signal level is a bit low for the UMIK-2. Are your results repeatable? Next stage is to configure the ASIO source. We'll select the miniDSP ASIO driver(previously installed) and follow the below example configuration.miniDSP assembled some very comprehensive steps by steps for the UMIK-1 for all sorts of applications. Please make sure to start reading our application notes to be up and running in no time! The UMIK-2 is of course fully compatible with REW (Room EQ Wizard) and Dirac Live (version 3 and later). Driverless operation with macOS, Linux, Android and iOS, and a supplied ASIO driver for Windows ensure simple integration into many other measurement and recording applications. With the UMIK-2, miniDSP once agains stretch the limits of affordable acoustic measurement gear. Let the measurement fun begin! Features This plot shows that there are slowly-decaying resonances around 26, 30, 57 and 74 Hz. With this type of graph, you may need to adjust some display parameters on the Controls and Limits popup windows to get the most useful and informative plot. For multichannel system (E.g. 5.1/7.1) or a surround application where multiple speakers are spreadout around the room, use the 90deg file and point the UMIK-1 at the ceiling. Recommended by our Friends