Joined in 2023 
82 
63 About this deal
If using PCIEx8/x16 card on PCIE2/PCIE4 slot, M.2 Key M2(M2_M2) and M.2 Key E(M2_E1) are limited to install. I’m considering to renew my PC (An 10 year old Xeon E3-1245v2 on Supermicro X9SAE-V with 16 GiB of ECC RAM). For Intel's W680 chipset launch, Supermicro has listed two motherboards designed around the new chipset. This includes the X13SAE and the X13SAE-Fmotherboards. These models are ATX in size and include support for DDR5-4400 memory, both ECC and non-ECC DRAM types.
Both the IMB-X1233-WV and IMB-X1231 ITX sized offerings allow support for Alder Lake-S processors with a maximum TDP of 65 W, while the micro-ATX IMB-X1314 and ATX IMB-X1712 enable users to use processors with a base TDP of up to 125 W. Support and compatibility here are aligned and determined by the base frequency TDP rating on these models. Both of the Supermicro X13 (W680) allow users to use Alder Lake-S processors with a base TDP of 125 W, and both are using a Realtek ALC888S HD audio codec. They share the same connectivity options, including HDMI 2.1, DisplayPort 1.4, and DVI video outputs, as well as three USB 3.2 G2 Type-A and one USB 3.2 G1 Type-A port on the rear panel.Design | Develop | Test | Manufacture With over three decades of experience in designing custom industrial and embedded computer and display solutions across a wide array of industries, we’re here to turn your ideas into reality I set up a new workstation with the Supermicro X13SAE motherboard. See https://www.reddit.com/r/lianli/comments/zmrlnn/old_and_new_workstation/. (The new workstation is now at the 3 monitor table, unlike the picture.) It's not uncommon for entry-level workstation/server boards that support Xeon E-series also to support the desktop version, but they will have a note indicating no ECC support for those mainstream CPUs. So, that's what I was looking for, but found no such thing!
Speaking of memory, the X13SAE-F uses ECC or non-ECC DDR5 RAM at speeds up to 4400 MHz. Memory support is currently limited to 4x 32GB or 128GB of total memory, though it is possible that the system might eventually support more if 64GB unbuffered DDR5 DIMMs are ever released. Whether it’s modifying an existing product or crafting an entirely new one, our design experts are committed to providing you with a comprehensive, end-to-end solution that perfectly suits your needs. Your satisfaction is our top priority, and we’re here to turn your ideas into reality. Some of the main features of the W680 chipset include a PCIe 4.0 x8 DMI link, which connects the processor to the chipset for improved bandwidth over Intel's previous W-series chipsets. Other features include support for up to eight SATA ports and integrated Wi-Fi 6E PHY/2.5 GbE MACs for vendors to hook in the latest networking controllers. Intel includes support for 16x PCIe 5.0 lanes from the CPU, with the usual 16/0 or 8/8 bifurcation options. Intel W680, Z690, W580, and W480 Chipset ComparisonApparently so. I followed the links to scrutinize the specs and search for a catch, but they don't even mention Xeon! Per VM encryption is another feature that's currently only supported on EPYCs, while the silicon is all there in all variants of the chips. I would like to have ECC on my next build. One choice would be an Ryzen 9 7900 (non-X) with an Asus AM5 motherboard, another would be this Supermicro X13SAE with a Intel 13700. I like the very long term support that supermicro has (BIOS upgrades and so on), but i think that the 13900 or even the 13700 could be too much power hungry for this board. It is supposed to support up to 125 TDP CPU with up to 8P+8E cores. The heatsink on VRM are very small (if we compare them to other motherboards VRM’s heatsink).
x PCIe Gen4 Slots (PCIE1/PCIE3:single at x16(PCIE1); dual at x8 (PCIE1) / x8 (PCIE3)) (PCIE1: Support riser card x8/x8) But while the Intel's Xeon E-3300-series processors and Intel's W680 platform are getting closer, we still have little idea about what to expect from new CPUs and chipset. Early leaks indicated that the new entry-level server/workstation platform will offer up to 16 CPU cores with TDPs of 35 W, 65 W and 125 W. Meanwhile, we have no idea whether Intel intends to enable AVX-512 support on its upcoming Xeon E-3300-series processors, or will keep it disabled, like it does with 12thGeneration Core CPUs. At the time of writing, Supermicro hasn't shared any information regarding the availability or pricing on its X13 (W680) motherboards. I’d rather prefer a DDR4-3200 ECC board, because those DIMMs are relatively easy to get and I might just lend it half of the 128GB I have in my Ryzen 5950X for a while.
Intel® Rapid Storage Technology enterprise
I wish they’d add a proper 10Gbit NIC already (it seems the board is prepared for it), but at least the x4 slot is open ended and a good fit for an ACQ107 or 113. Artificial Intelligence Use : Artificial Intelligence, Edge Computing, Machine Learning, Machine Vision Rear I/O on the X13SAE-F definitely looks more workstation than a server, with a full complement of display and audio outputs, along with more USB ports than most servers. The RJ45 network ports are interesting as well, with a dedicated BMC NIC along with both an Intel i219-LM 1 GbE port as well as an i225-LM 2.5 GbE port. Supermicro X13SAE F Slots The BIOS provides the ability to override PL1, PL2 and Tau, and I currently have PL2 set at 350W (which is probably above the max the CPU can actually draw), PL 1 at 200W, and Tau at 64 secs. I might actually be tempted to just go with a 58003D instead to offset the slower DRAM, even if this board is really more about juggling VMs. On one hand I want the responsiveness of high turbos, on the other hand this server of mine is designed for quiet and low power idle as it runs 24×7.
Great Deal 
New Comment