The RE450 isn’t the cheapest Wi-Fi 5 extender, but it’s faster and more stylish than the budget competition. Don’t be put off by its age: it still deserves a place on anyone’s shortlist.

It’s also worth trying out a few different wireless settings, such as switching radio bands, before you splash out on a new bit of kit. You might find that this gets you a better signal from your existing equipment and that there’s no need to buy an extender at all. What speeds can I expect?To test network performance, we use a laptop equipped with an Intel Wi-Fi 6 network card supporting 2×2 MIMO. We connect this laptop to the extended network, then take it to various areas of the home and copy a standard set of files to and from a NAS appliance, connected by Ethernet to the main router. By measuring the average read and write speeds, and comparing them to those achieved when connecting directly to the router, we can measure how each extender helps Wi-Fi range and performance. WIFI Booster / WIFI Repeater are normally use to extend the range of wi-fi signals in office, shops or home. In-fact you can use wi-fi repeater to connect various device such as computer, laptop, mobile, IOT devices etc. even if they are not in range of actual wi-fi network. Wi-fi repeater are universal compatible devices that work with any service provider router. Also, they are secure, reliable and easy to set-up. WI-fi repeaters are excellet choice for home usage i.e. watching HD movies, playing online games etc. The Magic 2 kit beats the old Magic 1 kit we had in this slot by giving you two high-speed 867Mbits/sec Wi-Fi streams for little more than the price of one, which comes in handy if you’re trying to network two or more devices. Advanced users will appreciate the companion app that shows connection diagnostics, so you can work out where to locate the plugs for the best performance. The web portal, meanwhile, lets you manage your wireless configuration, set up a guest network and apply an operating schedule so that (for example) the extended network is only available during office hours. The newer Wi-Fi 6 kits will give you even more performance if you have Wi-Fi 6 devices, but if not this is a great solution. The downside of these speeds is that they involve a design that looks more like a small router with a separate power supply. However, this gives you more flexibility than a plug-in unit, helping you to get a better signal, while you can also use this repeater as a Wi-Fi access point. And, just like the Repeater 3000, it’s as simple as anything to set up. The WiFi 6 Repeater 5400 will be overkill for many people, but if you must get a high-speed connection to a distant corner of the house, nothing else out there comes close.

The bigger brother of the lovable RE505X is another compact, plug-in Wi-Fi 6 extender, but with the speeds boosted to meet the AX3000 spec. Similar to its cheaper sibling, this model is easy to set up and configure using TP-Link’s Tether app, and it supports OneMesh technology for seamless roaming around the house. If you have a compatible TP-Link router, it can even set up the RE700X while in this mode. Every Wi-Fi extender we review goes through extensive hands-on testing. Each unit is installed in a real home, at an appropriate distance from the main Wi-Fi router according to the manufacturer’s recommendations. If it’s a powerline system, we connect the base unit to the main router via gigabit Ethernet and, again, situate the remote unit according to the instructions. Scenario 1 # You want to reconfigure your wifi extender because you have changed your service provider. It’s very easy to use as well, with setup managed by the superb TP-Link Tether mobile app, which provides access to all the settings you might need. Well, people normally get confused between these technical jargon’s. However, all three terms (i.e. Wifi Booster, Wifi Repeater and Wifi Extender) are used interchangeably, these devices are ultimately used to strengthen the range of wifi signals in your home or office dead zones.Step 4 # Insert the pin or pencil in the reset hole and press the button i.e. press button for 10 seconds continuously.