Additional restrictions and limitations apply, see warranty link: https://www.samsung.com/us/support/legal/mobile/#standard-limited-warranty Next, use your spudger to pry up on the battery connector gently. Be careful not to damage the connector as you do not want to have to replace the entire motherboard. Replacement Parts and of highest quality supplied by OEM and are guaranteed to completely fit and work.

If you are the owner of a Samsung A12 and have encountered a broken screen, then don’t worry – you’re not alone. Screen replacement is a common issue with smartphones, and it’s usually a pretty easy fix. In this comprehensive guide, we will walk you through the entire process of replacing your Samsung A12 screen. We’ll cover everything from preparing for the repair to completing the actual replacement. So if you’re ready to get started, keep reading! Once the frame is removed, locate the small silver connector that connects the display to the logic board. This connector is located just above the power button on the logic board. The next step is to remove the motherboard. Begin by removing the one screw that secures it in place. Once the screw is removed, disconnect the antenna cable from the motherboard. It is important to remove the antenna cable because without removing the cable, you won’t be able to remove the motherboard entirely from the phone’s body.If you think this replacement guide is easy, make sure to share it with your friends. If you don’t want to replace the screen yourself, you can always look for Samsung phone repair near you. They have proper tools and experience in this field, so you can rest assured that your phone is in safe hands.

The vibrator motor is located beneath the earpiece. Before you start removing the motor, make sure to apply heat so you can loosen up the glue. You can also use a heating pad for each step that requires minimal heat. A heating gun is the easiest and most convenient option. Now you have to take out the speaker from the phone’s left side. Removing it is easy. All you have to do is clip it with a tweezer, and it will come out. Booking a Samsung A12 repair with Timpson is easy-peasy. Just follow the five simple steps below and we’ll have it fixed before you know it.

Add your answer

So if you drop your unprotected phone, you have to make peace with the fact that you’ll need a screen repair. Keep in mind, if you have dropped your phone, there might also be some internal issues, aside from the visible damage. Therefore, it would be recommended to consult with an expert. Galaxy A12 is also known as a frame, chassis, support, AMOLED, S AMOLED, OLED, S LCD, TFT, LED, IPS, Retina, screen, internal screen, touch panel, touch screen, touch panel, window, touch display, digitizer, lens, outer glass, Corning, Gorilla, capacitive, resistive. Your phone Screen Replacement or repair will take approximately 40 Minutes ~ 1 hour. However some phone models might take longer to allow the adhesive enough time to bond properly. This time though will also vary depending on how many people you will find on queue. Customers are advised to come in early to avoid long waiting time and queues at our service center. something covered by our warranty (an "in warranty repair") or something not covered by our warranty Once the cover is off, you have to securely place the cover and the screws in a safe area so that you won’t lose them. Under the cover, you will see an antenna cable and the LCD connector. It is where step eleven begins. Removing Charging Port Board