We don't want the stand to interfere with the lever, so slide it all the way from side to side to note the full range of motion it needs to open and close. Add glue from the edge of where the lever stops when it is open and closed to about 1" above the bottom of the base on either side. Fold the small tabs on the arm's rectangle up to create a boxy U-shape. If you have trouble lifting them, a spatula helps. Now, since we want to fold our unicorn, we need the Cricut to add Score Lines in the correct spots. My file includes them, but Design Space requires a few steps to get them perfect. There are two common sizes of Original Gourmet lollipops. These DIY lollipop holders fit the larger size, which are 31g or about 1.1 oz. Original Gourmet also offers mini lollipops, which are 10.5 g or .37 oz. Add a thin line of glue to the base in between each rectangle, running from the outer edge to the inner.

Candy to put in your candy crafts (such as Hershey Kisses, Reese peanut butter cups, Brach’s Christmas Nougats, Lindor truffles, and red lollipops) This is a special project we made for our free Maker Academy Weekend 2022 event! A complete and detailed step-by-step video premieres during the event November 3-6, 2022 — specifically, this tutorial video was available to watch for free for 24 hours beginning November 5 at 2:00 pm ET! You can get access to the full video, the printable handbook that details how to make this beautiful project if you get a VIP Pass to Maker Academy Weekend 2022, which comes with other perks and bonuses, too! Once you have folded over all the bump outs, you can test the iris' action by holding on to the outer edges and moving the lever up and down. The iris should open and close in the center! You should see seven mats on your Prepare screen. If not -- and you're using the "score" file -- it's possible the Score Lines didn't attach correctly. To fix that, just press "Cancel" at the bottom right to return to the Canvas and follow the previous steps again.Yarn:Red Heart Super Saver.7 oz (198 g) and 364 yds (333 m). 100% Acrylic. Medium Weight Yarn [4]. OEKO-TEX Standard 100 certification. Machine wash and dry. This is such a cute Christmas craft that would make great gifts for your Brisbane Kids’ friends. Step 1.

Add the first mat's material to a StandardGrip Machine Mat face up and adhere it well with a brayer. Glue the arm piece in place using the same technique, but don't add adhesive at the lower hand areas. Finally, if you would like to add a little bow or ribbon to your reindeer for some extra flare, you can do this too! You can either choose a Christmas ribbon colour for this or else whichever colour your child loves most.Load the first mat into your Cricut and press the flashing button to begin cutting. When the cut is complete, unload the mat. Flip your design over and gently peel the mat away from your material. Use a weeding tool to gently lift the delicate parts.

Now take those two pieces and center both on the fox’s head vertically, but have the bottom edge slightly overlap the bridge of the arms piece. While it dries, glue the tail tip detail in place. Lay the cover piece on top so the edges line up. Make sure the bump out pieces from the base are even. Once decorated and dry, it is finally time to start assembling your reindeer lollipops. To do this, place one head shape face down, place the lollypop on top (lining up the sweet with the hole in the card) and then place the other head shape face up on top. Glue both pieces of the cardboard together. Step 5 Hold the fox's white ear pieces face up and glue them in place so there is an even trim of fur around the sides and top. Once they are glued together, place them behind the cut-out eyes to line them up and glue them in place.You don’t, but I designed these lollipop holders to fit the 1.1 oz Original Gourmet lollipops. If you use a different lollipop, they may not fit as perfectly. So be sure to do a test cut and fit first, then adjust as necessary to fit your candy. Align the top edge of the two hat pieces together and glue with the red piece on top. Glue the small circle to the point of the hat like a pompom. Glue the hat on the fox's head. The hat's side edges will just cover the inner ear parts. Complete the process for the rest of the mats, making sure to prep Mat 4 and its multiple colors correctly. STEP 4: ASSEMBLE YOUR UNICORN CANDY HOLDER Repeat the instructions between the asterisks the numberof times indicated. This repeat will contain multiple instructions.

There are so many fun, creative and SIMPLE Christmas craft ideas for kids – and these Reindeer Lollipops are one of the best! Requiring only a few items to make and a small amount of time to do, kids will love making them, gifting them, and eating them too! If you would love to make these up for class gifts, kids table centre or just a fun Christmas activity with the kids, below are our step-by-step instructions on how to make your own reindeer lollipops. What you will need to make Reindeer Lollipops These DIY Lollipop Holders need a bit of depth to make room for the candy, so we’ll also practice using perfectly-placed folds and glue in the tutorial. We can create straight folds using either dashed cut or score lines, but each technique requires different design methods and tools. You can resize them to fit on a Cricut Joy and use a smaller ornament ball. A Joy-sized version will be included in the design, too, after we do more testing. Get my free SVG files to create these adorable candy holders that open and close! Repeat the process for the objects on Mat 6, placing them in the bottom left corner of Mat 4. Then, move the objects from Mat 7 to the lower right corner of Mat 4. They fit right into the hole in these designs. All you need to do is add a dab of glue to the top, pinch the sides together, let that dry, and you are ready to go!

What you will need to make Reindeer Lollipops

The Cream Swirl lollipops have milk, soy, and coconut ingredients and all Original Gourmet lollipops are processed on the same machinery. They are peanut-free and Kosher. Now we can add the dome. Place your assembled iris with the glued bump outs facing up. Grab half of your 3" ornament.