The metric units for linear measurement in building and construction will be the metre (m) and the millimetre (mm), with the kilometre (km) being used where required. This will apply to all sectors of the industry, and the centimetre (cm) shall not be used. … the centimetre should not be used in any calculation and it should never be written down". [22] There are multiple commas missing throughout the article, especially before ‘and’ and ‘but’, please correct There are multiple articles missing throughout the manuscript please see few examples below and take time to correct the manuscript: affect reliability of -> affect the reliability of method in clinical assessment -> method in the clinical assessment no study related to precision and reliability -> no study related to the precision and reliability. The objective of this study is to evaluate the precision -> The objective of this study is to evaluate the accuracy. Plastic tape measure (cm) Manually reeled tape measure Self-retracting metal tape measure (US customary) Measuring tape capable of measuring down to 1⁄ 32in (0.794mm) Diagram showing fractions of an inch on a standard sixteenth measuring tape For a length less than 1 inch, simply read off the tape measure the length. If the increments of an inch are not labeled, determine the marking’s increment and add together the respective fractions. The tape measure must be printed in the actual size of the PDF document without any scaling or resizing.

While you are measuring, make sure to keep the tape as straight as possible. As you can see in the comparison below, even a slightly crooked tape measure can result in a different measurement that could throw off your entire project! Mark with a V Find/read the markings. On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them).The measuring tape is non-stretchable and 10 mm wide, making it ideal for measuring head circumferences where measuring with material or paper tape is inappropriate. The tape has a 1mm increments resolution, and its colour-coded markings make it easy to read results in metric (cm). Take a look at the side of your tape measure, near the belt clip. You will find a measurement listed there. This shows you the length of your tape measure's housing.

Every tape measure has a few essential parts, and learning how they work will make it easier to use! The Tape

Synchronize Measuring Tapes

Read one-half inch. Same principle as reading one inch, only this time the space between the second-biggest mark and the biggest is read. You can think of a half-inch mark as half way between a full inch.