REDSHIFT ShockStop Suspension Stem for Bicycles, Shock-Absorbing Bike Handlebar Stem for Road, Gravel, Hybrid, and E-Bikes

Product Information

I’ve covered 150 miles and about 15000 ft of climbing (as what goes up must come down, the same descent). So overall marks out of 10. Well I give the stem a really solid 9.5 out of 10. With only 0.5 mark lost for the boxy look with every other aspect full marks. The Utility Mount puts a small section of tube in front of the stem that provides a location to mount anything you would normally put on your handlebar (bike computer, phone, light, etc.).

In general, you'll find the +30 deg stem provides a more upright, comfort-oriented fit, whereas the +/-6 deg stem puts you in a more performance-oriented riding position (standard for a typical road bike). degree in 80, 90, 100, 110, and 120mm lengths (in both standard 1 1/8" steerer and oversized 1 1/4" steerer) Redshift have never claimed to be the inventor of a suspension stem, but they are certainly the most revolutionary. Many times have we heard people say:If you are unable to measure the length of your existing stem then choose 100 mm. This is one of the most common lengths and tends to be a good fit for most people. Based on any other suspension device that I have ever owned I can only give this 10 out of 10 for its simplicity. Final summary + Pros and Cons Please note, whilst we can Price Match the majority of products, sending this information does not guarantee a price match is viable. Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3

Some countries may incur VAT and Duty, please use a Duty Calculator and be prepared to pay these fees on arrival.

(2) Tune the Stiffness:

Come and see us! We're on the doorstep of Flyup417 Bike Park, Cranham Woods, Cotswolds Way and an hour away from the Forest of Dean. The easiest way to determine your handlebar size is to see if it's printed on the handlebar. This will require removing your current stem faceplate. You can measure the length of your existing stem by measuring the length from the center of the handlebar to the center of the steerer tube. Best method: Use a pair of calipers to directly measure the diameter or take your bike to the local bike shop and they will be able to measure it for you.

Well so far, it is still very new, over time there are only a couple of things to think about. 1) The bearings. I suppose ridden in the rain over years there is a potential to get water in the bearing, but I’d be surprised based on being high on the bike and hardly rotating. 2) the only other concern is the life of the elastomers but if these do wear out over time they are a doddle to change. For looks, quality and attention to detail I will give the stem 9.5 out of 10 (.5 lost for the boxy look) Ride faster - feeling refreshed from the energy that is normally wasted suspending your body as it is converted into forward motion So here goes, having made the decision to buy the stem I could be a little bias so I’m going to be deliberately critical to ensure you all get a good balanced idea. All Redshift Sports components are tested to the latest ISO 4210 standard for Racing Bicycles. These standards typically specify "Static Strength" tests (i.e. one-time application of force) as well as "Fatigue" tests (i.e. repeated application of force) for different bicycle components. Redshift Sports also run our own independent tests to better understand lifespan which typically involve cycling well beyond the specifications in the ISO 4210 standard.If premature elastomer wear occurs we will happily provide replacements free of charge. In addition, we sell replacement elastomer kits. How do I mount my GPS computer? Once you determine the length of your existing stem round to the nearest 10 mm and choose the closest match. Alternate method: Use a fabric or paper measuring tape (or print one at https://printable-ruler.net/ ) and measure the circumference of the steerer tube. You will need to remove the compression cap and loosen the two pinch bolts to get access to your steerer tube so be sure you are comfortable in doing so and then reassembling properly.