How does BenQ’s entry-level 24-inch 144Hz monitor stand up against the competition? Let’s take a look. Design We didn’t notice any significant display lag during our testing. Motion blur is controlled with a setting called AMA, which stands for Advanced Motion Accelerator. As with most BenQ monitors, we found that the middle AMA setting, ‘high’, produced better results than ‘off’ or ‘premium’. Premium resulted in some visible overshoot in some tests, while off had some noticeable motion blur. As usual, our benchmarks are performed using a Spyder4Elite*. We’re calibrating the display to gamma 2.2, white point 6500k and 120 nits of brightness. Together they tested the ZOWIE monitor on four FPS games, CS:GO, Rainbow Six Siege, Apex Legends, and Overwatch, and the following is a summary of their thoughts. Colour uniformity is also important, and the XL2411 again delivers a solid result. At anything less than 100% brightness, uniformity is very good with Delta-E values of less than 1.0 on average.

SOLVED] Benq XL2411 on 144hz not working only 60hz [SOLVED] Benq XL2411 on 144hz not working only 60hz

If you’re looking to get into the fast-paced world of competitive FPS video games, or if you want to upgrade your current monitor without breaking the bank, then I think you should take a hard look at the ZOWIE XL2411P monitor. It may not be the most attractive monitor on the outside, but it’s got it where it counts, a rich set of features that are going to help you take your game to the next level. Just keep in mind that you will have to spend some extra time configuring this monitor. I think, however, that you will find it to be worth the time you spend. Game on! The most difficult task for the BenQ XL2411K is competing with fast-IPS monitors with equally effective motion handling. Most other monitors have excellent color performance and cost nearly as much as this. This issue makes the XL2411K a difficult sell in the market, but it is still an excellent alternative for individuals who must avoid blurring and ghosting at all costs. Factual Analysis of Features Build-Quality Luminance uniformity is a little worse but still decent, with the bottom right quadrant appearing a little dimmer (~12%) than its contemporaries.

We used the gamma-3 setting, which on this occasion corresponded to a display gamma of 1.9. The gray ramp is relatively even, too. First up are colour gamuts; the monitor hits 98% of sRGB, 72% of NTSC and 76% of AdobeRGB. This is great but not outstanding for a TN-panel monitor, and combined with good colour accuracy means that the monitor can be used for non-critical photography and video work. BenQ’s Zowie Esports Gaming Model introduces a revamped iteration of their renowned XL2411P esports dedicated display. The 24-inch TN panel offers a 1920 x 1080 Full HD resolution, a refresh rate of 144Hz, and a response time of 1ms and DyAc technology. It is the most economical model in ZOWIE’s XL-K series. I don’t play very many FPS games, so I decided to get some expert help from a couple of guys who do. My son, Jacen, is the President of Liberty University’s Gaming Club and Director of Liberty Esports. Jacen and his business partner, Jaden, started the College Call of Duty League (CCL) where universities compete against each other regionally and nationally each year. Jacen (pictured left) plays on Liberty’s Overwatch and Dota teams. His friend, Trevor Ray (pictured right), is the manager of Liberty’s Dota team, and he plays on Liberty’s Dota and Rainbow Six Siege teams. Calibrating the BenQ XL2411K isn’t essential because the screen is already excellent, which is unusual for an E-Sports monitor. Feel free to experiment with different parameters to see what works best for you. If you want additional colors from the screen, you may also activate the monitor’s FPS1 option, which will cause some hues to show up to boost visibility.

XL2411 Software - Support | BenQ US XL2411 Software - Support | BenQ US

Next up is colour accuracy. We have decent but not great results throughout, with that teal shade proving troublesome once again. The average of 2.48 is not quite as good as the more high-end XL2540 we tested earlier this month, but it’s still decent for a TN-panel monitor. The second reason is that the default settings for the monitor are less than ideal. The XL2411P has a host of settings that you can use to adjust the display image, including brightness, contrast, color temperature, hue, color vibrance, and sharpness. Another significant improvement on the BenQ XL2411K is its connectivity configuration, which now includes more video inputs. On the panel, there are DisplayPort 1.2 and HDMI 2.0 slots, as well as two HDMI 1.4 slots. In comparison, the original XL2411 only offered HDMI 1.4 and DVI-DL, with only the latter supporting 144Hz operation. We tested the XL2411 in Counter-Strike: Global Offensive, Torment: Tides of Numenera and Project CARS. We also wrote this review, edited some photos and carried out other journalistic work over a one week period, using it as our primary monitor. Jacen preferred the sturdier base of the XL2411P over the base of his monitor, an MSI Optic G24C. Trevor liked the UI of the XL2411P as well as its rich set of features and options; he found changing the settings with the control keys to be easier on the BenQ than with his monitor, an AOC G2460P. Both of these guys, however, echoed my observations that the color on the XL2411P was worse; they spent more time on the BenQ adjusting the settings than they did on their own monitors, though in the end they were happy with their settings. Here are the settings that Trevor uses, if you need something to get you started:The image produced by this monitor will not be the most attractive available, but that is not its aim. Though it may not be suitable for casual gamers, the XL2411K is worth considering if you want to improve your competitive gaming talents. Alternative Choices to BenQ XL2411K Monitor The stand that comes with the BenQ XL2411K allows you to adjust the tilt, swivel, pivot, and height to your liking. This is especially critical for TN monitors, which have extremely limited viewing angles. We don’t think anyone will feel the need to use VESA mounting because it’s an exceedingly well-designed stand with added functions. Design Specifics The BenQ XL2411K only provides 98% sRGB coverage, which is enough for its primary purpose of competitive gaming. However, its accuracy is excellent because the deltaE average is only 0.31, which is only seen on consumer displays. It appears balanced straight out of the box, so you only need to adjust a few settings like brightness before using it. This monitor has a response time of 1 ms (GtG). The grey-to-grey (GtG) response time is a measurement of how long a pixel takes to changes colors. The lower the value the better, and the higher the refresh rate, the more important it is to have a lower response time. Low response times prevent ghosting, which is where fast-moving objects on the screen leave a trail behind them as they move across the screen. Most monitors are under 10 ms; my Dell, for example, has a response time of 8 ms. Gaming monitors should have 5 ms or less, and a 1 ms response time is good. To achieve a 1 ms response time, the XL2411P has a feature known as advanced motion acceleration (AMA) that must be enabled using the control keys. This drives more voltage to the liquid crystals, thus producing images faster. All in all, a very standard monitor that doesn’t really push the boat out when it comes to design – you could easily use this monitor in an office environment without turning heads. Testing

BenQ Zowie XL2411 review - Review - Monitors and Projectors BenQ Zowie XL2411 review - Review - Monitors and Projectors

We also have some initial measurements before our advanced testing begins, including a relatively low Delta-E values for white point and 50% gray. We can also see that we missed out 120 nits target by a small margin, with the display being a little too bright. The final step in setting up the monitor was to set the refresh rate. On Windows 10, I found this setting by going to: REVIEW – Without a doubt, the two most important components of a good gaming system are the video card and the monitor. The monitor is what gamers are looking at while playing, and the video card is what renders the games on the monitor. When I designed my current system, I included a GeForce GTX 1070 Ti, a solid, mid-range video card. For a monitor, I use a Dell UltraSharp U2715H. This monitor is a compromise for a gaming system. On the one hand it’s wonderfully large (27 inches), has great resolution (2560 x 1440), and includes a wealth of ports (including DP, mDP, 2xHDMI, 5xUSB); on the other hand, it has a60 Hz refresh rate and a lethargic 8 ms response time. It’s a great general-purpose monitor, but it’s not ideal for video gaming, especially for fast-paced, first-person shooter (FPS) games. This is why I was super excited to get an opportunity to review the BenQ ZOWIE XL2411P gaming monitor. What is it?

The first step for installation is to connect the arm onto the base. On the bottom of the base is a thumbscrew. I inserted the arm into the base and tightened the thumbscrew until it was snug. Let’s take a look at our benchmarks now, to get a more quantifiable idea of the monitor’s quality. Benchmarks I just got my new XL2411P today. I dual boot with Win10 and LinuxMint. Menu -> Display -> 144 Hz (VSync) and tested the refresh rate at “testufo.com” and I was very pleasantly surprised.

BenQ Zowie XL2411 Review | bit-tech.net BenQ Zowie XL2411 Review | bit-tech.net

TN-based panels are never ideal for video or photo work, but the XL2411 wasn’t too bad either. Once calibrated, it boasted relatively high colour accuracy and little colour shift was evident when viewing the monitor from the sides, above or below (although brightness was certainly affected). Prisijunkite ir mes jus pirmus informuosime apie kainų pasikeitimus! 💚 Prisijungti su Facebook Prisijungti su Google In short, the BenQ XL2411K is designed for one thing, and that is performance-driven esports gaming, which it achieves admirably. However, if color adherence is important, you can adjust the settings to find the best fit. The BenQ XL2411K is a redesigned version of the XL2411, a monitor that saw a lot of success in the ESports community in earlier years. BenQ improved it with features including DyAc technology, and it is also tuned for 120Hz operation with the Xbox Series X and PS5 consoles.We’ll be upgrading to an X-Rite i1Display Pro when our budget allows; this is all we have at the moment so please be understanding. So apart from the weird gamma results, it’s a pretty decent selection across the board with no major flaws. This wouldn’t be a great result for an IPS display aimed at photographers, but for a TN panel aimed at gamers it’s pretty good! Wrapping up