Broken key extractor set

Product Information

Here is the breakdown of the inventory you’d need for all the ways mentioned in the article to work. Tweezers are an excellent alternative for needle nose pliers, thanks to their more compact design. While needle nose pliers are relatively large, tweezers are much slimmer and can help you grab the key while it's further than pliers can reach. Unfortunately, tweezers aren't as sturdy as pliers, so they can easily slip off while you pull the key out. Yanking on a snagged key could result in further damage or broken pieces. If the key is jammed up, you can attempt to free it by gently wiggling it or turning it in both directions. Once the knife is in the keyway, apply leverage to the key. If your knife slips, try digging it into various other places on the key, including the bottom.

Make sure that you don’t push the key in too much. If it doesn’t get out by prodding a little, use one of the 6 ways that we’ll be discussing, as pushing the key too much would do more harm than you are good. Next, shove it into an open spot in the keyway with the barb facing perpendicular (90 degrees) to the key and then rotate the hook towards the key. To use superglue, place a VERY small amount of glue on the broken section of the key. Smear the glue around and wipe away any excess globs so nothing smushes out. All metallic objects can be magnetized. When a magnet is brought closer to a metal object, it takes on the magnetic field and the object becomes attracted to it. ( 2)Do not squeeze too hard on the tweezers. When the tweezers shut after gripping the key fragment, the fragment will be pushed further into the keyway. Each failed attempt to grip the key will make the key more difficult to remove. 2. Broken Key Extractor This method works really well; however, it may take several attempts, so don't get discouraged and keep at it! 10. Superglue NOTE: These numbers provide an average but you might have to wait longer. We think it's only fair that we warn you of this. It’s also a good idea, before starting the extraction process, to apply some kind of lubricant to the keyhole such as WD-4O to help get the broken key out faster. 1. Tweezers The first method is to slip your paperclip under the bottom of the broken piece and then push it downwards to leverage it into the key.

However, to use this method, the key piece will need to be close to the edge of the keyway. If it is too far in, you won't be able to reach it. One thing to keep in mind with this method is to not force the blade into the keyhole, it should be able to fit smoothly. If you find the need to force it, make adjustments to the blade to make it thin enough to fit. 4. Broken Key Extractor Select an extractor in your set once you have a good gauge of where the missing piece is lodged. Generally, the small hook type is the most common tool to use to search for nudges to hook a missing piece out. Additionally, both methods work far better with lubricant, and if you can pull the key far enough out, you may be able to finish the job with pliers. Before proceeding, it is essential to note that removing a broken key can cause further problems if rushed or done incorrectly. So be cautious and gentle while attempting any of the methods below.

FAQ’s

For example, if you slip up while removing the key, you could accidentally push it further into the keyway—aggravating the problem. Once inserted, gently lift the handle of the extractor upward and leverage it against the top of the keyway to help dig the barbs into the key.

The metal used for most keys is relatively soft, and typically the tip of a sharp knife will pierce the side of the key well enough to leverage it out. In this guide, we'll cover 11 tried-and-true methods using various objects—many of which you likely have in your own home. Another tool you can use when your key breaks is a pair of needle-nose pliers. You should use this method, especially if your key broke, leaving only the bow in your hand. There should be part of the broken key protruding out of the keyhole for this method to succeed. If you don’t have a kit and you’re attempting to remove the key with the tools mentioned above then try the following: You'll need to dig the knife into the sides of the broken key while pulling it out. It won't work instantly, but if you give it several tries, you'll notice the key coming out. You can even use two knives on each side of the key, but you should be careful not to cut yourself. 12. Drill Bit

The main challenge with graphite spray lubricant is that it can stain your surfaces. So, you'll want to ensure the nozzle is in the keyway before you spray the lubricant to avoid getting it all over the door. You should also have a rag or paper towel at hand to wipe off the excess lubricant that will spill from the keyway. Once the extractor is hooked to the bottom of the key piece, gently try to slide it out along with the key fragment. There is no need to pull the entire chunk out, a small part of it would do. From there, you can use tweezers to yank the broken key out.

For this, you’d need a drill. Simply plug the instrument into a power outlet, and start drilling through the keyhole. For any of the methods below, you'll want to reduce as much friction as possible. While this step isn't necessary, it can help significantly. If the broken section of the key is flush with the end of the keyway—like in the image below–you may be able to use a small screw to remove it. Some extracting tools—such as HPC spiral blade key extractors—use a thin, flexible bar with a spiraled thread on it—similar to a screw.There are two ways to use a paperclip to extract a broken key. In my experience, thinner paperclips tend to work better and give you a deeper grip on the key. There are many different types of key extractors, but each is typically used the same way. They dig something sharp into the broken piece of the key and give you the leverage to pull it out.