LUCKY Portable Wireless Fish Finder for Shore Fishing

Product Information

Besides, the economical price and unchallenging operating mechanism fit the bill for beginners and occasional anglers, especially those running low on budget. I tried to connect to the microcontroller with a serial device on the soldering pad. They are connected to RX / TX of the microcontroller, V+ and gnd. But I was not able to see or trigger any data transfer event. I used realterm and a rs232 cable "spy". Rx or tx was not blinking or doing anything. If this is the case, maybe we can have the "clean signal voltage" out of pin 9 of this IC. They call it the demodulated signal.

Lucky Fish Finders of 2023 - Best Reviews Guide Top 10 Lucky Fish Finders of 2023 - Best Reviews Guide

Secondly, its wireless transducer eliminates the nuisance of cables, leaving more room for tossing fish there. Wireless range works to a distance of 147ft from your standing position.The AA32416 IC (on the right corner) is were I choose to invest time for now: I figure out all the IC pin connection and this is were I need your help to go further. Sensor features: with led indicator that helps identify when it's charging or working, it has fish attractive lamp, line hole with built-in rechargeable battery In the first video, they report a whole lot of fish. We can also see on the corner that the depth is stable at about 1.5m. Not way off from what I can tell by the image. Pin 12 (RSSI output pin) is connected to ground through a parallel arrangment of a 18 pf capacitor and a 1M resistor and it is the only pin that is connected to the microcontroller (pin 1). I took a different example of the same "brand" of fishfinder apart, and was daunted by a separate small circuit board that has at least 3 tuned circuits, and several different connections to the micro. That was too much of a challenge for me, but yours looks a lot simpler. You will almost certainly need an oscilloscope to trace the signal paths.

Lucky Portable Fish Finder Review of (2023) - Expert Opinion Lucky Portable Fish Finder Review of (2023) - Expert Opinion

wide range of depth】- user selectable meter or feet readings.range of depth readout from 0.7 meters up to 100 meters. One reason for its multi-functioning capacity is the portable and compact size of the gadget. It is small enough to fit even in the hand of a petite female, which means you could easily accompany it on a kayak or a small watercraft without it overcrowding your little vessel. There are a number of Fish Finders on the market which run on WIFI connectivity. This limits your range to a maximum of 75 meters which is not enough for most lakes! Our Fish Finder has a 300 meter range which will cover almost all lakes! The aluminum shielded coils are most likely tuned impedance transformers. They could be used for the echo receive input circuitry and/or to increase the transmit voltage. Adjustibility: 2.4-inch color tft lcd, and can adjust the sensitivity, brightness, and chart speed setting. depth upper and lower limit setting can also be adjusted.

Tags two fish sizes under and over 38 cm. ibobber syncs with ios 6.0, 7.0 and 8.1 operating systems (apple). phone and tablets for android (v4.3), using bluetooth smart v4.0.