The time it takes to change a car tyre can vary depending on your experience and the specific circumstances. On average, it can take approximately 15 to 30 minutes to change a tyre. However, it is essential to prioritise safety and take the necessary time to complete the task correctly. Pulled steering– if you loosen your grip on the steering wheel on a flat road you might notice your car pulls to the side

You may have to roll the car forward slightly to ensure the sealant spreads through the entire tyre. Using your hands or tyre levers, work the bead of the first half of the tyre over the rim. Then insert the tube into the tyre (It may be easier to slightly inflate the tube to aid it going in and reduce the risk of pinching the inner tube). Finally, with the help of your tyre levers, work the other half of the tyre of the rim – being careful not to pinch or catch the inner tube. Do use appropriate safety gear: When changing motorcycle tyres, always prioritise your safety. Wear gloves to protect your hands from sharp edges and potential injuries. Safety glasses will safeguard your eyes from debris or flying particles. When you realise you have a flat tyre, find a safe spot away from traffic to avoid any accidents. Pull over to the side of the road, preferably on level ground, Once the tyre is inflated to the recommended pressure, drive to the nearest garage or tyre fitters.Ensure you have a safe and well-lit workspace to work on your motorcycle. Park the bike on a stable surface and raise it using a stand or a lift. The bike needs to be lifted high enough to be able to remove the wheel(s) so you want to make sure the bike won’t move anywhere, you don’t want it falling on you or on the floor, mending a dent in your fuel tank could be expensive! To ensure your safety and optimise the performance of your bike on the roads, it is recommended to replace tires as a matched set. Consult your manufacturer’s recommendations and consult with a professional at a reputable tyre dealer or service centre or look at forums online to see what others are using on their bikes. How long do motorcycle tyres last? Massage’ the tyre into the well of the rim, ensuring the tube isn’t being pinched by the bead of the tyre. Scott Windsor / Our Media Don’t rush the process: Changing a motorcycle tyre requires attention to detail and precision. Rushing through the process can lead to mistakes, overlooking important safety measures, or improper tyre installation. Take your time, follow the step-by-step guide, and ensure each task is completed correctly before proceeding to the next. A patient approach will help you avoid costly errors and ensure a successful tyre change. If you keep getting flat tyres it could be a sign of an underlying problem with your car, such as a faulty valve stem or a damaged mounting surface of your wheel.

Yes. If you don’t have a pressure gauge or tyre pump at home, head down to a local petrol station that does. On most forecourts you’ll be able to find both a pressure gauge (that gives readings in bar and PSI) and an air pump. While it’s possible to drive with a slow puncture, doing so increases the chances of the puncture growing in size and releasing more air. Roughen the surface of the tube around the hole with sandpaper (usually included with any good puncture repair kit). Now that the vehicle is lifted, fully unscrew the lug nuts and remove the flat tyre carefully. Place it aside, away from your work area. Step 6: Install the Spare TyreWhile it is best to use a spare tyre that matches the size and specifications of your other tyres, using a temporary spare tyre with different specifications is acceptable for short distances and at lower speeds. However, it is recommended to replace the temporary spare with a proper matching tyre as soon as possible. Lubricant (soapy water or tyre mounting paste)– To use on the bead to help the tyre come away from the rim. Also to help lubricate the beads of the new tyre. Either way, you’ll need to pull over and stop as soon as possible. Do so somewhere safe if you can, such as a lay-by or side street. Try to avoid stopping on a busy, fast or poorly sighted road. Don’t force the tyre onto the rim: If you encounter excessive resistance while fitting the tyre onto the rim, avoid forcing it. Forcing the tyre can damage the tyre bead, rim, or even cause personal injury. Instead, reassess the situation, ensure the tyre is properly aligned, and consider using tyre irons to gradually work the tyre onto the rim. Take your time and apply gentle, even pressure to avoid any mishaps.