I decided to put my money where my mouth is and try it in a number of my own air rifles, but using a pull-through rather than a rod. When using any type of liquid near the breech of an airgun, less is definitely more, and I was careful to use a minimal amount with each pass of the patch. Once the pull-through loop is in place, consult your instruction manual to determine how many patches you'll need for your calibre. Attach the patches to the loop and pull through the air rifle, examining the patches for fouling. Repeat until they come out clean. With the Napier Pull through tool and easy-to-follow instructions, you'll have everything you need to get your air rifle clean and functioning at its best. Plus, the kit comes with a convenient component case, making it easy to store and transport. Perfect Choice for Airgun Enthusiasts Airgun oil: Aerosol oils like Power Airgun Oil can be sprayed down the barrel to help loosen lead deposits before cleaning begins in earnest. The same oil can be sprayed on the patches for use with the pull-through.

How to clean your airgun - Airgun Magazine How to clean your airgun - Airgun Magazine

As an air rifle owner, you know that accuracy and consistency are key to a great shooting experience. But did you know that every time you fire your air rifle, lead deposits on the rifling lands? Over time, this can cause your accuracy to suffer - not to mention the risk of corrosion. A brush can be attached to the rod to agitate deposits in the bore. Traditionalbristles are made of phosphor bronze, an alloy of copper, but many shooters prefer to use brushes with nylon bristles, which are less likely to cause any damage. Scroll down to watch the video below for detailed instruction on how to use the Power pull through kit. Complete Air Gun Cleaning Kit

Want to achieve the ultimate in accuracy? The secret is simple: regular cleaning and relubrication of your barrel.

Power Pull Through Kit | Napier UK – Napier-usa Power Pull Through Kit | Napier UK – Napier-usa

Patches: These pre-cut patches are also from Napier – just layer different numbers of patches according to the calibre of the gun you’re cleaning, and don’t forget some pistol barrels can be cleaned this way as well.Bore pastes are grey to begin with, so that will account for some of the discolouration on the used patches, but the results were nevertheless incredible. So why wait? Keep your air rifle in top shape with Napier's pull-through kit and enjoy a smooth, accurate shot every time. Your air rifle (and your aim) will thank you! The easiest way to insert a pull-through is directly into the barrel – this BSA Ultra XL makes the job easy The Napier Airgun Pull Through Kit comes complete with 100 Power pull through patches, ensuring you'll have plenty on hand for multiple cleanings. Our kit also includes 1 x 120ml Power Airgun oil Pump Spray, which contains exactly the same amount of active ingredient as the 200ml Aerosol version. Convenient and Portable

Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot

Pull-through: This pull-through from Napier has been given a bore-friendly coating that won’t harm the rifling. The big advantage of a pull-through is the fact that you’re cleaning the barrel in the direction of travel of the pellet.A: No, you should not use WD-40 to clean your air rifle. While WD-40 is great for cleaning other things, it’s not designed for cleaning firearms and can actually damage the seals on your air rifle. Q: How do I clean my air rifle scope? A: How often you should clean your air rifle will depend on how often you use it. If you never use it, you won’t have any real need to clean it (provided that it’s stored correctly). A well-made air rifle won’t need to be cleaned each time it’s used, and if anything, cleaning too often can actually risk damaging the barrel. All of that is to say that you only need to clean your air rifle if you notice a decline in accuracy, or if you want to experiment with a new kind of pellet. Even then, many people recommend never cleaning an air rifle at all. Q: What kind of cleaning kit do I need for my air rifle? Use just the right amount of compound or solvent – you don’t want it seeping into internal areas such as the transfer port A secondary benefit of bore paste is its deep cleaning ability, and some shooters like to use it as an occasional cleaning product in addition to its intended use of prepping a new bore. Bore paste is meant to be applied to either a patch or brush, and rodded down a barrel.

What are the best air rifle cleaning kits? | The Wolfman

x 120ml Power Airgun oil Pump Spray (This contains exactly the same amount of active ingredient as the 200ml Aerosol version) Instructions and component case Watch our video on How to clean an air rifle and How to clean an air rifle barrel Drinking straw: A straw gives the pull-though a head start any time you’re trying to clean a barrel that doesn’t offer direct access to the muzzle, such as a shrouded barrel with a non-removable end cap.

Ammo

While plenty of people will clean their airguns with a rod, two things really do go against this method. Rods are supposed to be used with something called a bore guide which keeps the rod central to the bore as it travels down the barrel. Bore guides are intended to be used with powder-burners where the bolt can be removed and the bore guide inserted in its place. As mentioned above, I’m not a fan of using cleaning rods with airguns, but bore paste can be applied using a pull-through. It won’t be as thorough, but you can repeat the process as many times as you like until you’re happy with the result. US firm KG Industries makes some fairly high-tech gun care products, one of which is KG2 Bore Polish. Of all the bore pastes I’ve ever used, this is probably the most gentle, lending itself to repeat applications.