JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film to Digital Photos,Film and Slide Scanner Accessories

Product Information

It can be used to photograph 35mm film and is compatible with the following select CAN., NIK., SON., Laowa and OLY. lenses 1: I have a few different ways to digitize 35mm film: dedicated film scanner, flatbed scanner, cheap CMOS digitizer, and old school film/slide holder for use with a digital camera and macro lens. I use them all depending on the purpose of the moment. The tolerance of the sliding carriers in the film housing is not ideal. There's room for some slight tilting. I fixed this by adding bits of thin, dense foam to the slot in the film holder where the carriers sit. That eliminates any play and keeps the carriers level.

When using an incandescent light source, keep the diffuser screen at least 30cm (1 ft.) from the bulb. If the adapter is placed too close to an incandescent bulb or left too long in its vicinity, the heat may damage the film or deform the holder. The light diffuser is good, but too close to the film plane IMO. It's close enough that dust on the diffuser might be inadvertently brought into focus, so it could need frequent cleaning. This appears to be the case with the ES-2 as well. That is almost true for me, although I can sometimes get what are slightly better results using a 24mp camera than I get with my film scanner. levels 6500K LED light】Super bright LED light with soft screen provides 10 levels adjustable Large Viewing Area Ultra Bright Daylight LED Illumination to Render Images in Vivid, Crystal Clear Detail.The length of the control line is 1.5m, you can control the light switch at will.

The supplied adapters allow you to attach the set to different lenses and the angle of view and tilt can be adjusted by using the view angle adjustment ring on the barrel. Dedicated film holders for both film strips and mounted slides2 are included, as well, to help hold the film taut and to benefit handling. Besides that, the set is particularly well-suited for the NIK. D850 camera due to its dedicated Negative Digitizer mode and ability to automatically reverse colors in-camera to expedite the digitizing process. Additionally, you can use the set together with the included LED Light3 to get high quality light source and improve image sharpness. Complete accessories】Works with 1x 35mm film holder(Negative holder), 1x 35mm Slide holder(Positive holder), 1 LED Light with 42 beads and Photos- Works Standalone, No Computer/other camera accessories required. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. However, three Kodak mounts can be easily slipped into the film gate without using the slide carrier. That's 0.135 inch, more than 3mm. That might also work with the ES-2.

I was going to cut that tube to a better length, but the easy solution is to instead substitute one of the #2 tubes (there are two of those in the kit), which are shorter. The other #2 tube remains available as an extension for use with my APS-C camera if I need to shoot with that for some reason. I believe the combination of two #2 tubes would only be needed with macro lenses longer than about 80mm, so that's not an issue for me.The JJC FDA-S1 includes a barrel, eight adapters, a slide mount holder, a strip film holder and an LED light. It is recommended to select the image stabilizer switch of the lens to "OFF" when using the FDA-K1. JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film to Digital Photos,Film and Slide Scanner Accessories One slight annoyance with my personal gear is that I can't make the extension short enough to entirely fill the frame using my full frame camera with the 50mm macro. At the shortest extension, the lens can provide only about 0.9x magnification instead of 1x, meaning the final pixel resolution of the image is slightly less than optimal. That's a result of the design of the lens housing, so it will likely be different with different lenses. Not a big deal, really. The extensions and lens ring adapters are all metal. The film housing is plastic, as are the film and slide carriers. The plastic seems okay for the purpose, and the carriers are easy enough to work with.