Honeywell Home Ding Dong Classic Wired Doorbell – White, D117

Product Information

It’s testing to find out what happens if the relay failed, all I’m asking is this a normal feature, can’t find any documentation, I assume it was a safety feature but as the Unifi forums are filled with people having door bells rebooting/shutting down I was interested to see if anyone had tried connecting nothing then testing. Keep in mind that you run your Unifi Protect Doorbell on 24VAC, your chime will need to support that as well. One of the fun (and sometimes useful) things about the Unifi G4 Doorbell is that you can display custom messages. It’s designed to show you everything on your doorstep – people head to toe or parcels on the ground.

Honeywell Home D117 8V Ding Dong 2 Note Doorbell, White Honeywell Home D117 8V Ding Dong 2 Note Doorbell, White

So yes, it’s a nice idea that you can communicate through the display with a text message, but it isn’t really practical. If you enable mechanical or digital come and there is an open circuit on the chime adapter, then it would be expected for something like this to happen. On the device with notifications disabled, and a live video stream running, it actually continues uninterrupted whereas the device that gets the notification suffers the video stoppage.I guess with a hard wired chime you would have to do like a double bell for push button and a single bell for motion… Is that possible?

FRIEDLAND DOORCHIME KIT CONSISTING OF D780, D534, D117 - Repelec FRIEDLAND DOORCHIME KIT CONSISTING OF D780, D534, D117 - Repelec

Our friendly staff are here with technical advice to help you find the right solution for your needs.I tried setting up the G4 without installing the Chime option, and exactly the same thing happens (with no ding-dong from the chime, obviously) so I don’t think this is necessarily an electrical issue. The doorbell was delivered with a 16V / 16 VA power unit, but I think this won’t work with the 24V relay) Is this setup correct?

D117 | Resideo Ding Dong Classic Wired Doorbell - White - D117 | Resideo

Later in the article, I will describe a solution to how you can use an 8V chime and the Unifi Doorbell together. Just like with the Unifi Cameras, we can create motion and privacy zones and configure when we want to receive an alert.

When turned on, the led ring will be white the whole time and blink after a press of the doorbell button and off is completely off. The reason for this is that when it rains, light reflections of passing cars could trigger a motion alert. So the notification self is great and works really well, but I don’t think they can replace a chime in my opinion.

D117 DING DONG DOOR BELL CHIME HONEYWELL - Radio Parts D117 DING DONG DOOR BELL CHIME HONEYWELL - Radio Parts

Is there any chance you could just verify your instructions at the point below as they don’t match up to the diagram… Thanks!With the two spades from the Unifi bell module connected to the “power input” posts of the relay, how is the circuit closing by connecting wires to three and five, only to one side of the power circuit, and the other to the normally open Terminal? A simple way to test is, is to open a YouTube video on your mobile while standing next to your door. The first time I use the bell it lights up red (but not triggers the relay) and then it kinda stays in a glowing state. I did however decide to disconnect the transformer to the chime as it seemed a little overpowering for it (buzzing when triggered), however I just modified your instructions to remove the 12v line and run it on batteries like it used to. Split one of the wires that is going to the doorbell and connect the wire adapters of the chime adapter between it (the red wire in the diagram).