For most Ei Electronics mains powered smoke alarms, a replacement kit is available containing a compatible smoke alarm, and in the case of Ei140 and Ei160 alarms, the new head just slides onto the existing base without the need for an electrician. Here are some common questions we have been asked by our customers about Ei Electronics and Aico (Ei’s UK operation) mains powered smoke alarms and heat alarms through our fire safety forum. In an interlinked system when one unit detects smoke, all alarms sound. To silence the alarms in case of a false alarm, press the hush button on the unit that has detected the smoke. This will silence all interlinked alarms.

The memory feature allows an Alarm that has previously activated to be easily identified (the red LED will flash twice every 48s for a 24h period after an alarm activation). How to stop beeping from Ei / Aico mains powered smoke and heat alarms Ei141, Ei144, Ei146, Ei150, Ei151, Ei154, Ei156, Ei161, Ei164, Ei166 Up to twenty alarms can be interconnected which will cause all alarms to sound when one unit senses fire. The E2110e can be interconnected via hardwire or wirelessly with the RadioLINK+ module Ei100MRF (sold separately) enabling it to communicate with compatible Ei Alarms and accessories. Up to 12 devices can be interconnected.Is capable of alarm data extraction using AudioLINK TM or whole system data extraction with RadioLINK Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system. This allows Alarm Test, Locate and Hush functions to be performed from floor level. If the Ei2110 is also interconnected to other 2110/160RC Series mains powered alarms, then the whole system can be controlled remotely. The large Test and Hush button on the front of the product allows for safe and easy operation using a cane or a broom. These rechargeable Lithium cells are designed to have a minimum ten-year life and outlast the life of the alarm itself. They provide up to six months alarm operation without mains power.

Remove the alarm from its base and press the test button to drain the residual charge. Does the beeping stop? If not, you have a different alarm in the room that is beeping, e.g. a CO alarm with a low battery One of the Ei168 radio bases flashes amber light every 10 seconds. All other bases in the group are fine. Solution Additionally, its resistance to false alarms is also increased. This is further enhanced by the unique dust compensation feature that automatically adjusts for any contamination within the optical sensor chamber.If a smoke detector is removed from the base and the battery is also removed, the alarm might still hold some residual charge and beep for up to a minute. Pressing the test button for about 10 seconds will discharge the circuitry. The radio interlinked smoke alarms of the Ei140 series alarms, while having been fitted by an electrician, are not interconnecting. Solution