FLSUN QQ-S 90% Pre-assembled Delta 3d Printer Printing Size Φ255X360mm Lattice glass platform Auto Leveling Touch Screen

Product Information

Even though the 3D printer detects short circuits and missing thermistors, it does not shut down when there is no temperature change despite heating up. You need to modify the pulse value of the extruder in the line ">EXT0_STEPS_PER_MM 367" to the pulse of the new extruder in the firmware configuration file. Featuring fast print speeds and due to its bigger size at 255 × 365 mm, perfect if you're wanting faster, larger prints without sacrificing quality. The belt tension can be conveniently adjusted on the pulleys at the top of the frame using knurled nuts. Due to the A9488 stepper motor drivers, the QQ-S Pro is relatively loud, even though the dampers on the motors in the base swallow quite a bit of noise.

This is because the large delta 3D printer comes with strong hardware, but firmware that does not meet the minimum requirements. I have found this from the flsun qqs facebook group that someone made, uploaded it to the SD, started duetwifi 192. status":"1","isDefault":"1","createDate":"2021-08-20 13:55:41","updateDate":"2021-08-20 13:55:41","productSkuSpecs":[],"moq":1,"skuId":0,"chargedWeight":13. The printer is from a secondhand reseller he changed the belt and the printing block, updated to mks 2. The easiest solution for us here is to fall back on the 3D printing community and install an alternative firmware on the device.

You do have to master a few English words here, but once again the video instructions explain how to operate the printer. In an emergency, the corresponding heating elements are on full power until they burst into flames or melt the surrounding plastic.

My main responsibility as an editorial assistant is maintaining the Library section, which aggregates reviews from other publications and channels. After a 30 minute assembly following the maker's included video and instructions, the machine was constructed and powered on.

Since only a small mass has to be moved, the stepper motors can be controlled with high acceleration values. Nevertheless, for the computing hardware in 3D printers, the equations of motion are not easy to solve, because several square roots must be drawn for each motion. However, the practical test with the original MKS firmware reveals considerable weaknesses here at higher printing speeds. Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.